Timing belt Optibelt 100 AT10 / 11000 AFX
- Brand
- OPTIBELT
- Category
- Power transmission
- Subcategory
- Timing belts
- Series
- Alpha Flex
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
OPTIBELT 100 AT10 / 11000 AFX belongs to timing belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for 100 AT10 / 11000 AFX and any equivalents.
The Optibelt 100 AT10 / 11000 AFX is an Alpha Flex timing belt with an AT10 profile, a 11000 mm length and a 10 mm pitch. When you are replacing a belt, the marking on the back of the old belt is the first thing to read. It gives you the profile and length you need to match.
A marking such as AT10 and 11000 mm identifies the profile and the length. The AT10 profile is a synchronous belt profile, and the 11000 mm length is the datum length for this belt. The 10 mm pitch is the distance between tooth centers. Confirm these three values against the old belt before you request a quote.
If the marking is worn or unreadable, measure the old belt and note the tooth profile and the length in millimeters. The part number 100 AT10 / 11000 AFX combines the profile and the length, so it is the reference we use to identify the belt. Send that part number, or the marking from the back of the belt, by WhatsApp or email.
We carry the Optibelt Alpha Flex line and can help confirm that this belt matches your drive. If you have the old belt in hand, a photo of the back marking and the tooth profile helps us verify the part number. Our team replies promptly with a quote.
Dimensions
- Profile
- AT10
- Pitch
- 10mm
- Length
- 11000mm
Frequently asked questions
- How do I read the marking on my old timing belt?
- Look for the profile and the length on the back of the belt. In this case, the marking would show AT10 for the profile and 11000 mm for the length. The 10 mm pitch is also part of the specification. Write down all three values and compare them to the part number 100 AT10 / 11000 AFX.
- What if the marking on my old belt is unreadable?
- Measure the old belt and note the tooth profile and the length in millimeters. The profile is AT10 and the length is 11000 mm for this belt. Send those measurements, or a photo of the belt, and we can help confirm the right part number.
- What information do I need to request a quote?
- Send the part number 100 AT10 / 11000 AFX, or the marking from the back of your old belt. If you have the profile and length, include those as well. We will reply promptly with a quote.