Timing belt Optibelt 100 / 8M 7600 AFX
- Brand
- OPTIBELT
- Category
- Power transmission
- Subcategory
- Timing belts
- Series
- Alpha Flex
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
OPTIBELT 100 / 8M 7600 AFX belongs to timing belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for 100 / 8M 7600 AFX and any equivalents.
The Optibelt 100 / 8M 7600 AFX is an Alpha Flex timing belt in HTD 8M profile with a 7600 mm length and 8 mm pitch. It is a long, wide synchronous belt, so the drive it runs on is worth checking before the new belt goes on.
Start with the sheaves. Worn tooth flanks, corrosion in the grooves, or a sheave that no longer matches the HTD 8M profile will shorten the life of any new belt. Check that the sheaves are clean, true and correctly aligned, and that the shaft bearings turn freely. On a drive this size, a small alignment error at one end can show up as edge wear at the other.
Confirm the belt path and tensioning arrangement before fitting. Inspect idlers and tensioners for play or rough running, and check that the take-up has enough travel to bring the belt to the correct tension. The belt should sit square in the grooves along its full run, with no twist and no rubbing on guards or structure.
When you request a quote, send the part number 100 / 8M 7600 AFX along with the belt marking from the old part if it is still readable. A photo of the drive and the sheave detail helps us confirm the profile and length. We carry Optibelt and reply promptly by WhatsApp or email.
Dimensions
- Profile
- HTD 8M
- Pitch
- 8mm
- Length
- 7600mm
Frequently asked questions
- What profile and length is this belt?
- It is an HTD 8M profile with an 8 mm pitch and a 7600 mm length, part number 100 / 8M 7600 AFX.
- What should I check before fitting it?
- Check the sheaves for worn or corroded grooves, confirm alignment and bearing condition, and inspect idlers and tensioners for play. Verify the take-up has enough travel to tension the belt correctly.
- How do I request a quote?
- Send the part number 100 / 8M 7600 AFX by WhatsApp or email. If you can, include the marking from the old belt and a photo of the drive so we can confirm the right belt.