Timing belt Optibelt 100 / 8M 2400 AFX
- Brand
- OPTIBELT
- Category
- Power transmission
- Subcategory
- Timing belts
- Series
- Alpha Flex
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
OPTIBELT 100 / 8M 2400 AFX belongs to timing belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for 100 / 8M 2400 AFX and any equivalents.
The Optibelt 100 / 8M 2400 AFX is a timing belt in the Alpha Flex series with an HTD 8M profile, a 2400 mm length and an 8 mm pitch. Before you fit it, inspect the drive and sheaves so the new belt runs true from the first start.
Check the sheaves for worn grooves, burrs, or debris that can damage the belt teeth. Confirm the sheave profile matches HTD 8M and that the 8 mm pitch aligns with the pulleys. Verify that shafts turn freely and that no misalignment or excessive play remains in the drive.
Measure the old belt and compare the marking on its back with the Optibelt 100 / 8M 2400 AFX. The 2400 mm length and HTD 8M profile must match the drive requirements. If the old belt is unreadable, send the part number and photos of the drive and sheaves for confirmation.
After fitting, check tension and recheck alignment after the first run-in period. Keep the drive clean and free of oil or debris that could affect belt life. For a quote on the Optibelt 100 / 8M 2400 AFX, contact MR Industrial Accessories by WhatsApp or email with the part number.
Dimensions
- Profile
- HTD 8M
- Pitch
- 8mm
- Length
- 2400mm
Frequently asked questions
- What should I check on the drive before installing this belt?
- Inspect sheaves for wear or damage, confirm they match the HTD 8M profile, and make sure shafts spin freely and are aligned. Correct any issues before fitting the new belt.
- How do I confirm the Optibelt 100 / 8M 2400 AFX is the right belt?
- Compare the part number, the HTD 8M profile, the 2400 mm length and the 8 mm pitch with your drive specifications or the marking on the old belt.
- What information do you need for a quote?
- Send the part number 100 / 8M 2400 AFX by WhatsApp or email. If you are unsure, include photos of the drive and sheaves and the old belt marking so we can help confirm the right belt.