Timing belt Optibelt 100 / 8M 2104 AFX
- Brand
- OPTIBELT
- Category
- Power transmission
- Subcategory
- Timing belts
- Series
- Alpha Flex
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
OPTIBELT 100 / 8M 2104 AFX belongs to timing belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for 100 / 8M 2104 AFX and any equivalents.
When you need to replace a timing belt, the marking on the back of the old belt is the most reliable starting point. This page covers the Optibelt 100 / 8M 2104 AFX, an HTD 8M profile timing belt with a 2104 mm length from the Alpha Flex series. Use the part number to request a quote or confirm it matches your drive.
The 100 / 8M 2104 AFX is an Optibelt timing belt in the Alpha Flex series. It uses the HTD 8M profile with an 8 mm pitch and a 2104 mm length. These three details—profile, pitch and length—are what you compare against the old belt's marking. If the back of the belt reads 100 / 8M 2104 AFX, this is the same specification.
Timing belts are often replaced during scheduled maintenance or after a drive inspection reveals wear. Check the pulley teeth for debris or damage, confirm the belt tracks correctly, and verify tension according to your equipment manual. If the drive uses more than one belt, replace them as a set to keep loads even.
To request a quote, send the part number 100 / 8M 2104 AFX by WhatsApp or email. If you are unsure about the marking or need help confirming the right timing belt for your drive, include a photo of the old belt and any drive details you have. We carry Optibelt belts and can help you match the profile and length.
Dimensions
- Profile
- HTD 8M
- Pitch
- 8mm
- Length
- 2104mm
Frequently asked questions
- How do I confirm this is the correct belt for my drive?
- Read the marking on the back of the old belt. If it shows 100 / 8M 2104 AFX, this Optibelt belt matches that profile, pitch and length. You can also send us a photo of the old belt and we will help you verify.
- What does the HTD 8M profile mean for my application?
- HTD 8M is a timing belt profile with an 8 mm pitch. The 2104 mm length is the belt's datum length. These dimensions must match your pulleys and drive layout for proper fit.
- Can I request a quote for just one belt?
- Yes. Send the part number 100 / 8M 2104 AFX by WhatsApp or email and we will reply promptly with a quote. If you need multiple belts for a set, include the quantity.