Timing belt Optibelt 100 / 8M 1800 AFX
- Brand
- OPTIBELT
- Category
- Power transmission
- Subcategory
- Timing belts
- Series
- Alpha Flex
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
OPTIBELT 100 / 8M 1800 AFX belongs to timing belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for 100 / 8M 1800 AFX and any equivalents.
The Optibelt 100 / 8M 1800 AFX is an Alpha Flex timing belt with an HTD 8M profile, an 1800 mm length and an 8 mm pitch. To match it to the belt being replaced, read the marking on the back of the old belt and compare the profile, length and part number directly.
Start by confirming the profile and length. This belt is HTD 8M with an 8 mm pitch and an 1800 mm length. If the old belt is worn or the marking is unreadable, measure the length and count the teeth only as a cross-check, then compare the result with the Optibelt part number on the replacement.
The 100 / 8M 1800 AFX is the number to quote. Send that number, the profile, the length and the width from the old belt marking by WhatsApp or email, and the team will confirm the belt or suggest an equivalent. Photographs of the back of the belt and of the drive help confirm the match.
Before fitting, inspect the pulleys for wear, alignment and correct tooth form, and check the tensioner and any idler for smooth operation. On drives with more than one belt, replace the set together so the drive runs evenly. After installation, check tension to the drive manufacturer's specification and recheck it after the first run-in period.
Dimensions
- Profile
- HTD 8M
- Pitch
- 8mm
- Length
- 1800mm
Frequently asked questions
- How do I confirm this is the correct replacement belt?
- Compare the marking on the back of the old belt with the Optibelt 100 / 8M 1800 AFX. The profile must be HTD 8M, the pitch 8 mm and the length 1800 mm. If the marking is unclear, send the part number and the belt dimensions for confirmation.
- What should I send to request a quote?
- Send the part number 100 / 8M 1800 AFX, the profile, the length and the width from the old belt. A photo of the back of the belt and of the drive helps the team confirm the correct belt or suggest an equivalent.
- Should I replace more than one belt at the same time?
- On a drive that uses multiple belts, replace the full set together. Mixed wear between old and new belts can affect load sharing and belt life.