Timing belt Optibelt 100 / 8M 1000 AFX
- Brand
- OPTIBELT
- Category
- Power transmission
- Subcategory
- Timing belts
- Series
- Alpha Flex
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
OPTIBELT 100 / 8M 1000 AFX belongs to timing belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for 100 / 8M 1000 AFX and any equivalents.
This Optibelt Alpha Flex timing belt is identified by the code 100 / 8M 1000 AFX. It uses the HTD 8M profile with a 10000 mm length and an 8 mm pitch. It is a synchronous belt for drives where tooth engagement and length must match the original specification.
Timing belts of this type are used on industrial drives that require synchronized motion between shafts. The HTD 8M profile and 10000 mm length make this belt suitable for long-center-distance drives where the belt runs over matching 8M pulleys. Confirm that the existing belt is a timing belt with the same profile and length before ordering.
To verify fit, read the marking on the back of the old belt. The code 100 / 8M 1000 AFX identifies this Optibelt Alpha Flex belt. Check that the profile is HTD 8M, the length is 10000 mm, and the pitch is 8 mm. If the old belt is worn or the marking is unreadable, measure the length and count the teeth to confirm the profile.
When requesting a quote, send the full belt code, the profile, and the length. If you are replacing a belt on a drive with multiple belts, note the quantity and any matching requirements. Our team can help confirm the right belt or suggest an equivalent based on the information you provide.
Dimensions
- Profile
- HTD 8M
- Pitch
- 8mm
- Length
- 10000mm
Frequently asked questions
- How do I confirm that this Optibelt 100 / 8M 1000 AFX belt fits my drive?
- Check the marking on your old belt. It should show the same code, profile HTD 8M, length 10000 mm, and pitch 8 mm. Also confirm that the pulleys are designed for the HTD 8M profile.
- What information should I send with my quote request?
- Send the full belt code, the profile, and the length. If you are replacing multiple belts, include the quantity. A photo of the old belt marking can also help us confirm the correct part.
- Can you help if I don't have the original belt code?
- Yes. If the marking is unreadable, provide the profile, length, and pitch from your measurements or drive documentation. Our team will help identify the right belt or a suitable equivalent.