Timing belt Optibelt 100 / 5M 7600 AFX
- Brand
- OPTIBELT
- Category
- Power transmission
- Subcategory
- Timing belts
- Series
- Alpha Flex
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
OPTIBELT 100 / 5M 7600 AFX belongs to timing belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for 100 / 5M 7600 AFX and any equivalents.
The Optibelt 100 / 5M 7600 AFX is an Alpha Flex timing belt with an HTD 5M profile, a 5 mm pitch and a 7600 mm length. We carry it for maintenance and engineering teams that need a synchronous belt matched to the drive by profile and length. Before you fit it, inspect the drive and the sheaves so the new belt starts on a sound system.
Check the sheaves first. Look for worn grooves, corrosion, chips, or material buildup in the tooth spaces, and confirm the sheaves run true with no looseness on the shafts. A sheave that is worn or misaligned will shorten the life of any timing belt, including this HTD 5M belt. Verify that the profile and pitch match the pulleys and that the 7600 mm length suits the drive layout.
Then check the rest of the drive. Confirm the shafts are parallel and the pulleys are aligned, set the tension according to your drive requirements, and make sure guards and bearings are in good condition. If you are replacing a belt on a drive that has run for a long time, inspect the whole system rather than only the belt. Send the part number 100 / 5M 7600 AFX, or the marking from the back of the old belt, and our team will confirm the belt or suggest an equivalent.
Dimensions
- Profile
- HTD 5M
- Pitch
- 5mm
- Length
- 7600mm
Frequently asked questions
- What are the key dimensions of this Optibelt belt?
- It is an Alpha Flex timing belt with an HTD 5M profile, a 5 mm pitch and a 7600 mm length. The part number is 100 / 5M 7600 AFX.
- What should I check before fitting this belt?
- Inspect the sheaves for wear, corrosion or buildup, confirm they run true, and check shaft alignment and pulley condition. A worn or misaligned drive will reduce belt life.
- How do I request a quote for this belt?
- Send the part number 100 / 5M 7600 AFX by WhatsApp or email. If you are unsure of the number, send the marking from the back of the old belt and we will help confirm the right belt or suggest an equivalent.