Timing belt Optibelt 100 / 5M 4600 AFX
- Brand
- OPTIBELT
- Category
- Power transmission
- Subcategory
- Timing belts
- Series
- Alpha Flex
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
OPTIBELT 100 / 5M 4600 AFX belongs to timing belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for 100 / 5M 4600 AFX and any equivalents.
This Optibelt 100 / 5M 4600 AFX is a timing belt in the Alpha Flex series. Its HTD 5M profile and 4600 mm length are the two numbers that matter most when you are matching a belt to a drive. Use them to confirm the belt will sit correctly in the pulleys and reach the take-up you have.
The profile is HTD 5M, a synchronous profile with a 5 mm pitch. The belt is identified as 100 / 5M 4600 AFX, and the length is 4600 mm. In a timing belt, profile and pitch control how the teeth engage the pulley grooves, while length sets the center distance the belt can span. If your drive was built around an HTD 5M pulley set, this is the profile to match.
When you request a quote, send the part number 100 / 5M 4600 AFX and, if you have it, the marking on the back of the old belt. That marking is often the fastest way to confirm you are ordering the same profile and length. If the old belt is worn or unreadable, measure the length and count the teeth so we can help you verify the 4600 mm and HTD 5M details.
Dimensions
- Profile
- HTD 5M
- Pitch
- 5mm
- Length
- 4600mm
Frequently asked questions
- What do the profile and length mean on this belt?
- HTD 5M is the profile and pitch: the teeth are designed for HTD 5M pulleys with a 5 mm pitch. The length is 4600 mm, which is the belt's length around the drive. Together they determine whether the belt fits your pulleys and center distance.
- How do I confirm this is the right belt for my drive?
- Check the marking on the back of the belt you are replacing. If it reads 100 / 5M 4600 AFX, that is the same part number. If it is unreadable, confirm the pulley profile is HTD 5M and measure the belt length to compare with 4600 mm.
- What should I send to get a quote?
- Send the part number 100 / 5M 4600 AFX by WhatsApp or email. If you can, include the old belt's back marking or a photo of it. If the belt is not readable, tell us the profile and length you measured so we can help confirm the match.