Timing belt Optibelt 100 / 5M 3200 AFX
- Brand
- OPTIBELT
- Category
- Power transmission
- Subcategory
- Timing belts
- Series
- Alpha Flex
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
OPTIBELT 100 / 5M 3200 AFX belongs to timing belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for 100 / 5M 3200 AFX and any equivalents.
This Optibelt Alpha Flex timing belt is identified by its profile and length: HTD 5M, 3200 mm, with a 5 mm pitch. The part number 100 / 5M 3200 AFX combines these dimensions for a direct match.
When you need a replacement, start with the belt you are removing. Confirm the profile is HTD 5M and the length is 3200 mm. The 5 mm pitch is the distance between tooth centers, so it must match the pulleys exactly. If the old belt is worn or the marking is unreadable, measure the length and count the teeth to verify.
The 100 / 5M 3200 AFX is a timing belt, also called a synchronous belt. It is built for drives where the belt and pulleys must stay in step. The HTD 5M profile is a common choice for precise positioning. This belt is 3200 mm long, which suits long-center-distance drives.
To request a quote, send the part number 100 / 5M 3200 AFX or the profile and length: HTD 5M, 3200 mm. If you are unsure, send a photo of the back of the belt and the pulley teeth. We carry Optibelt and can help confirm the right belt or suggest an equivalent.
Dimensions
- Profile
- HTD 5M
- Pitch
- 5mm
- Length
- 3200mm
Frequently asked questions
- What does the 100 / 5M 3200 AFX part number tell me?
- It identifies an Optibelt Alpha Flex timing belt with an HTD 5M profile and a 3200 mm length. The 5 mm pitch is the distance between tooth centers.
- How do I confirm this belt fits my drive?
- Check that your pulleys are HTD 5M and that the required belt length is 3200 mm. The 5 mm pitch must match the pulley grooves. If you have the old belt, compare the marking on the back.
- What should I send to get a quote?
- Send the part number 100 / 5M 3200 AFX, or the profile and length: HTD 5M, 3200 mm. If you need help identifying the belt, send a photo of the back of the belt and the pulley teeth.