Timing belt Optibelt 100 / 5M 2300 AFX
- Brand
- OPTIBELT
- Category
- Power transmission
- Subcategory
- Timing belts
- Series
- Alpha Flex
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
OPTIBELT 100 / 5M 2300 AFX belongs to timing belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for 100 / 5M 2300 AFX and any equivalents.
The Optibelt 100 / 5M 2300 AFX is an Alpha Flex timing belt with an HTD 5M profile, a 2300 mm length and a 5 mm pitch. Before you fit it, inspect the drive and the sheaves so the new belt runs true from the first start.
Check the sheaves for worn grooves, burrs, corrosion or buildup, and confirm the teeth are clean and undamaged. Verify alignment between the pulleys and check that the shafts and bearings turn freely. A drive that is out of line or has damaged sheaves will wear a new belt quickly, regardless of the belt's condition.
Measure the old belt and compare it with the Optibelt 100 / 5M 2300 AFX. The profile is HTD 5M, the length is 2300 mm and the pitch is 5 mm. If the drive uses more than one belt, replace the full set at the same time so the load is shared evenly.
When you request a quote, send the part number 100 / 5M 2300 AFX, the quantity and the drive details. If you are unsure of the correct belt, send the marking from the back of the old belt and photos of the drive, and the team will help confirm the right belt or suggest an equivalent.
Dimensions
- Profile
- HTD 5M
- Pitch
- 5mm
- Length
- 2300mm
Frequently asked questions
- What does the marking on the back of the belt tell me?
- It identifies the belt. For this belt the marking is 100 / 5M 2300 AFX, which covers the profile, the length in millimeters and the pitch. Use it to match the replacement.
- Should I replace more than one belt at a time?
- On a multi-belt drive, replace all belts in the set at once so they share the load evenly. Mixing a new belt with worn belts can cause uneven tension and early failure.
- What should I check on the drive before fitting the new belt?
- Inspect the sheaves for wear or damage, confirm the pulleys are aligned and check that the shafts and bearings turn freely. Correct any problem before you fit the Optibelt 100 / 5M 2300 AFX.