Timing belt Optibelt 100 / 14M 8204 AFX
- Brand
- OPTIBELT
- Category
- Power transmission
- Subcategory
- Timing belts
- Series
- Alpha Flex
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
OPTIBELT 100 / 14M 8204 AFX belongs to timing belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for 100 / 14M 8204 AFX and any equivalents.
The Optibelt 100 / 14M 8204 AFX is an Alpha Flex timing belt with an HTD 14M profile and an 8204 mm length. Before you fit it, the drive is worth a close look. Worn sheaves and misalignment shorten the life of any new belt, so the inspection is part of the job, not an extra step.
Check the sheave grooves for wear, corrosion and embedded debris, and confirm the teeth are clean and undamaged. Verify that the shafts are parallel and the sheaves are aligned, since a belt running out of line will wear along one edge. Look at the bearings and the tensioning arrangement as well; a rough bearing or a seized adjuster will affect how the new belt runs.
Once the drive is sound, fit the belt and set tension to the drive manufacturer's specification. Recheck alignment and tension after the first run-in period. Keep the old belt as a reference if you need to confirm the marking.
Send the part number 100 / 14M 8204 AFX, or the marking from the back of the old belt, by WhatsApp or email and our team will confirm the right belt or suggest an equivalent.
Dimensions
- Profile
- HTD 14M
- Pitch
- 14mm
- Length
- 8204mm
Frequently asked questions
- What should I check on the drive before fitting this belt?
- Inspect the sheave grooves for wear, corrosion and debris, confirm the shafts are parallel and the sheaves aligned, and check the bearings and tensioner. Correct any of these before the new belt goes on.
- How do I confirm this is the right belt for my drive?
- Send us the part number 100 / 14M 8204 AFX or the marking from the back of the old belt. We will confirm it against the HTD 14M profile and 8204 mm length, or suggest an equivalent.
- How do I request a quote?
- Message us on WhatsApp or by email with the part number and the quantity you need. Our team replies promptly and can help confirm the right belt.