Timing belt Optibelt 100 / 14M 7196 AFX
- Brand
- OPTIBELT
- Category
- Power transmission
- Subcategory
- Timing belts
- Series
- Alpha Flex
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
OPTIBELT 100 / 14M 7196 AFX belongs to timing belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for 100 / 14M 7196 AFX and any equivalents.
When you need to replace a timing belt, start by reading the marking on the back of the old belt. The Optibelt 100 / 14M 7196 AFX is an HTD 14M timing belt with a 7196 mm length. We carry this belt and can help you confirm it against your drive.
The marking on a timing belt typically shows the profile and the length. For this Optibelt Alpha Flex belt, the profile is HTD 14M, the pitch is 14 mm, and the length is 7196 mm. If your old belt reads the same profile and length, this part number is the direct match. If the marking is worn or missing, measure the old belt or check the drive documentation to confirm the HTD 14M profile and 7196 mm length.
Timing belts are often replaced as part of scheduled maintenance. Before ordering, inspect the pulleys for wear or damage and confirm the belt is correctly tensioned. If you are replacing more than one belt on the same drive, it is good practice to replace them as a set so they wear evenly. The 100 / 14M 7196 AFX is a single belt; check your drive for the number of belts required.
To request a quote, send the part number 100 / 14M 7196 AFX by WhatsApp or email. If you are unsure about the profile or length, include photos of the old belt marking and the drive. Our team can help confirm the right belt or suggest an equivalent.
Dimensions
- Profile
- HTD 14M
- Pitch
- 14mm
- Length
- 7196mm
Frequently asked questions
- How do I confirm this is the right belt for my drive?
- Read the marking on the back of your old belt. It should show the profile and length. This belt has an HTD 14M profile and a 7196 mm length. If the marking matches, this part number is the correct replacement.
- What if the marking on my old belt is unreadable?
- Measure the old belt or check your drive documentation for the profile and length. You can also send photos of the belt and the drive when you request a quote, and we can help confirm the correct belt.
- Can I replace just one belt on a multi-belt drive?
- It is generally recommended to replace all belts on the same drive at the same time so they wear evenly. This part number is for one belt; check how many belts your drive uses.