Timing belt Optibelt 100 / 14M 6706 AFX
- Brand
- OPTIBELT
- Category
- Power transmission
- Subcategory
- Timing belts
- Series
- Alpha Flex
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
OPTIBELT 100 / 14M 6706 AFX belongs to timing belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for 100 / 14M 6706 AFX and any equivalents.
The Optibelt 100 / 14M 6706 AFX is an Alpha Flex timing belt with an HTD 14M profile, a 6706 mm length and a 14 mm pitch. When you are replacing a belt on a driven machine, this page gives you the exact identification data to match against the belt you are removing.
Start with the marking on the back of the old belt. If it reads 100 / 14M 6706 AFX, this is the same identification. If the old belt is worn or the print is gone, measure the profile and the length and compare them with the HTD 14M profile and the 6706 mm length listed here. The 14 mm pitch is the distance between teeth and must match the pulley grooves.
A timing belt must match the drive on all three points: profile, pitch and length. HTD 14M is a distinct profile, so a belt of another profile will not seat correctly in the pulleys even if the length is close. Check the pulleys for worn teeth, the flanges for damage and the tensioner for smooth movement before you fit the new belt.
If you are unsure whether this is the correct replacement, send the part number 100 / 14M 6706 AFX, the machine make and model, and a photo of the old belt marking to our team by WhatsApp or email. We carry Optibelt and can confirm the belt or suggest an equivalent from the data you provide.
Dimensions
- Profile
- HTD 14M
- Pitch
- 14mm
- Length
- 6706mm
Frequently asked questions
- How do I confirm that the 100 / 14M 6706 AFX is the belt I need?
- Check the marking on the back of the belt you are replacing. The part number 100 / 14M 6706 AFX identifies an Optibelt Alpha Flex timing belt with an HTD 14M profile, a 6706 mm length and a 14 mm pitch. If the marking is unreadable, measure the profile and the length and compare them with these values.
- Can I use a different profile belt if the length is the same?
- No. The profile and the pitch must match the pulleys. This belt has an HTD 14M profile and a 14 mm pitch. A belt of another profile or pitch will not seat correctly in the pulley grooves, even if its length is 6706 mm.
- What should I send to request a quote for this belt?
- Send the part number 100 / 14M 6706 AFX by WhatsApp or email. If you want us to confirm it against your drive, include the machine make and model and a photo of the old belt marking. We will reply with a quote or an equivalent suggestion.