Timing belt Optibelt 100 / 14M 4900 AFX
- Brand
- OPTIBELT
- Category
- Power transmission
- Subcategory
- Timing belts
- Series
- Alpha Flex
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
OPTIBELT 100 / 14M 4900 AFX belongs to timing belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for 100 / 14M 4900 AFX and any equivalents.
The Optibelt 100 / 14M 4900 AFX is an Alpha Flex timing belt with an HTD 14M profile, a 4900 mm length and a 14 mm pitch. Before fitting it, inspect the drive and the sheaves so the new belt runs on a sound system.
Check the sheaves for worn grooves, burrs, corrosion or buildup, and confirm that the teeth are clean and undamaged. Verify alignment between the pulleys, because misalignment will shorten the life of any synchronous belt. Confirm that the sheave profile matches the HTD 14M profile and that the 14 mm pitch is correct for the drive.
Look at the bearings, shafts and tensioning device for play, noise or roughness, and correct any issues before the belt is installed. A worn tensioner or a loose shaft will prevent the belt from running true. Once the drive is in good condition, fit the Optibelt 100 / 14M 4900 AFX and set tension according to the drive requirements.
When requesting a quote, send the complete belt marking, the Optibelt 100 / 14M 4900 AFX, along with the profile HTD 14M, the 4900 mm length and the 14 mm pitch. If you are replacing a belt on a drive with more than one belt, note that the other belts on the drive should be inspected as well. Our team can confirm the correct belt and suggest an equivalent if needed.
Dimensions
- Profile
- HTD 14M
- Pitch
- 14mm
- Length
- 4900mm
Frequently asked questions
- What should I check on the drive before installing this belt?
- Inspect the sheaves for wear, damage or buildup, check pulley alignment, and examine bearings, shafts and the tensioner for play or roughness. Correct any problems before fitting the new belt.
- How do I identify the Optibelt 100 / 14M 4900 AFX?
- The belt is marked with the code 100 / 14M 4900 AFX. It has an HTD 14M profile, a 4900 mm length and a 14 mm pitch.
- What information do you need to quote this belt?
- Send the full marking, the Optibelt 100 / 14M 4900 AFX, and confirm the profile HTD 14M, the 4900 mm length and the 14 mm pitch. Include the drive details if you need help confirming the right belt or an equivalent.