Timing belt Optibelt 100 / 14M 4550 AFX
- Brand
- OPTIBELT
- Category
- Power transmission
- Subcategory
- Timing belts
- Series
- Alpha Flex
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
OPTIBELT 100 / 14M 4550 AFX belongs to timing belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for 100 / 14M 4550 AFX and any equivalents.
The Optibelt 100 / 14M 4550 AFX is an Alpha Flex timing belt with an HTD 14M profile, a 4550 mm length and a 14 mm pitch. When you are replacing a belt on a driven machine, the fastest way to confirm the correct part is to match these three values against the belt that comes off the drive.
Start with the marking on the back of the old belt. It should carry a profile, a length and a pitch that correspond to HTD 14M, 4550 mm and 14 mm. If the marking is worn or unreadable, measure the belt and the drive instead: count the teeth, check the tooth pitch against the 14 mm value, and confirm the overall length against 4550 mm. A belt with the same profile but a different length will not sit correctly on the pulleys.
Because this is a timing belt, the teeth and the pitch are what transmit the drive, so the replacement must match both. The Optibelt Alpha Flex construction is identified by the part number 100 / 14M 4550 AFX, and we carry it as a stocked line for maintenance and purchasing teams. If you are unsure whether this is the belt on your equipment, send the part number from the old belt and the machine details, and our team will help you confirm the match or suggest an equivalent.
Dimensions
- Profile
- HTD 14M
- Pitch
- 14mm
- Length
- 4550mm
Frequently asked questions
- How do I confirm that the Optibelt 100 / 14M 4550 AFX is the belt I need?
- Check the marking on the belt being replaced. You are looking for an HTD 14M profile, a 4550 mm length and a 14 mm pitch. If those match, this is the correct Optibelt part number. If the marking is unclear, measure the old belt and compare the profile, length and pitch against these values.
- What information should I send to request a quote?
- Send the part number 100 / 14M 4550 AFX, or the marking from the old belt, along with the quantity you need. If you have the machine make and model or a photo of the drive, include that as well so we can help confirm the belt before you order.
- Can you help if the old belt marking is different?
- Yes. Send the part number or the marking from the belt you are replacing, and our team will review the profile, length and pitch to help you find the right Optibelt belt or a suitable equivalent.