Timing belt Optibelt 100 / 14M 3598 AFX
- Brand
- OPTIBELT
- Category
- Power transmission
- Subcategory
- Timing belts
- Series
- Alpha Flex
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
OPTIBELT 100 / 14M 3598 AFX belongs to timing belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for 100 / 14M 3598 AFX and any equivalents.
The Optibelt 100 / 14M 3598 AFX is a timing belt in the Alpha Flex series with an HTD 14M profile. It measures 3598 mm in length on a 14 mm pitch. When you are replacing a belt, match these figures to the belt in hand before you order.
Read the marking on the back of the belt you are replacing and compare it with the Optibelt 100 / 14M 3598 AFX. The profile and the length are the two figures that decide fit: HTD 14M and 3598 mm. If the old belt is worn or the marking is no longer legible, measure the length and check the tooth profile against the pulley grooves.
The 100 / 14M 3598 AFX is a timing belt, also called a synchronous belt, so it drives by tooth engagement rather than friction. Confirm the belt width and the pulley tooth count against the drive before installation, and inspect the pulleys for wear or damage while the belt is off. A belt that matches the original profile and length is the correct starting point for the replacement.
Send the part number 100 / 14M 3598 AFX by WhatsApp or email to request a quote. If you are unsure whether this is the right belt, send the marking from the old belt or the profile and length you measured, and the team can help confirm it or suggest an equivalent.
Dimensions
- Profile
- HTD 14M
- Pitch
- 14mm
- Length
- 3598mm
Frequently asked questions
- How do I confirm this is the belt I need to replace?
- Check the marking on the back of the old belt for the profile and length, and compare them with HTD 14M and 3598 mm. If the marking is unreadable, measure the length and verify the tooth profile against the pulleys.
- What information should I send with my quote request?
- Send the part number 100 / 14M 3598 AFX, or the profile and length from the belt you are replacing. A photo of the back marking can help the team confirm the correct belt.
- What profile and length does this belt have?
- The Optibelt 100 / 14M 3598 AFX has an HTD 14M profile, a length of 3598 mm and a pitch of 14 mm.