Timing belt Optibelt 100 / 14M 1750 AFX
- Brand
- OPTIBELT
- Category
- Power transmission
- Subcategory
- Timing belts
- Series
- Alpha Flex
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
OPTIBELT 100 / 14M 1750 AFX belongs to timing belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for 100 / 14M 1750 AFX and any equivalents.
This page covers the Optibelt 100 / 14M 1750 AFX, an Alpha Flex timing belt in the HTD 14M profile. If you are replacing a belt on an existing drive, the fastest way to confirm the match is to read the marking on the back of the old belt and compare it against this listing.
The 100 / 14M 1750 AFX is built to the HTD 14M profile with a 14 mm pitch and a 1750 mm length. Those three values, profile, pitch and length, are what identify the belt on the drive. A belt that differs in any one of them will not seat correctly in the pulleys or hold the correct center distance.
When you pull the old belt, check the back for a printed code and note it exactly, including any prefix or suffix. Then measure the length if the marking is worn. Send us the marking, the profile and the length, along with the quantity you need. We carry Optibelt and can confirm the right belt or suggest an equivalent.
If the drive runs more than one belt, plan to replace the full set rather than a single belt. Belts that have run together take a set and wear at the same rate, so mixing a new belt with used ones can load the new belt unevenly.
Dimensions
- Profile
- HTD 14M
- Pitch
- 14mm
- Length
- 1750mm
Frequently asked questions
- How do I confirm this is the belt I need?
- Read the marking on the back of the belt you are replacing and compare it to the part number on this page. Confirm the profile is HTD 14M, the pitch is 14 mm and the length is 1750 mm. If the marking is unreadable, measure the length and send us the profile and length for confirmation.
- What information should I send for a quote?
- Send the part number, the marking from the old belt if you have it, the profile, the length and the quantity. Photos of the belt back and the drive pulleys also help us confirm the match.
- Should I replace all the belts on the drive at once?
- On a multi-belt drive, replacing the full set keeps tension and wear even across the belts. A single new belt matched to used belts can carry more load than the others.