Timing belt Optibelt 100 / 14M 11900 AFX
- Brand
- OPTIBELT
- Category
- Power transmission
- Subcategory
- Timing belts
- Series
- Alpha Flex
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
OPTIBELT 100 / 14M 11900 AFX belongs to timing belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for 100 / 14M 11900 AFX and any equivalents.
This Optibelt Alpha Flex belt is an HTD 14M timing belt with a 11900 mm length and a 14 mm pitch. It is the kind of synchronous belt used on large, slow-turning drives where tooth engagement, not friction, carries the load.
You will find HTD 14M synchronous belts on high-torque industrial drives: main shafts, crushers, mixers, large blowers and similar equipment where a wide, long belt runs at low speed and the pulley grooves do the driving. The 14 mm pitch and 11900 mm length put this belt in that class of drive, so it is worth confirming both against the machine before you order.
The reliable way to confirm fit is to read the marking on the back of the belt you are replacing and match it to the part number, profile and length. If the marking is worn off, measure the pitch and the length of the old belt and count the teeth. Send us the part number, or those measurements, and we will confirm the belt or point you to the closest match.
On a drive with more than one belt, replace the full set at the same time so the load stays even across the belts. Check the pulleys for worn grooves, the tensioner for free movement and the alignment of the shafts before the new belt goes on.
Dimensions
- Profile
- HTD 14M
- Pitch
- 14mm
- Length
- 11900mm
Frequently asked questions
- How do I confirm this Optibelt belt fits my drive?
- Match the part number 100 / 14M 11900 AFX against the marking on the belt you are removing. If it is unreadable, confirm the HTD 14M profile, the 14 mm pitch and the 11900 mm length on the drive, then send us those details.
- What information do you need for a quote?
- Send the part number 100 / 14M 11900 AFX by WhatsApp or email. If you are not certain of the number, send the belt marking, the profile, the pitch and the length instead, and we will confirm the right belt.
- Should I replace more than one belt at a time?
- On a multi-belt drive, yes. Replacing the set together keeps tension and load shared evenly across the belts and avoids mixing a new belt with worn ones.