V-belt Optibelt 10 x 2500 Li
- Brand
- OPTIBELT
- Category
- Power transmission
- Subcategory
- V-belts
- Section
- Z
- Series
- VB S=C Plus
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
OPTIBELT 10 x 2500 Li belongs to v-belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for 10 x 2500 Li and any equivalents.
This Optibelt VB S=C Plus belt is a classical V-belt with a Z profile and a 2500 mm length. It is used on industrial drives where a classical V-belt cross-section is required. To confirm fit, match the profile and the length to the belt you are replacing.
Classical V-belts like this one are common on fans, pumps, compressors and other general industrial drives. The profile and the length are the two dimensions that matter most when selecting a replacement. Check the old belt for a printed profile and length, or measure the outside length and compare it to the 2500 mm figure.
If the marking on the back of the belt is worn or missing, note the drive's sheave groove width and the center distance between pulleys. These details help confirm that a Z profile belt with a 2500 mm length is the correct match. When several belts run together on a multi-groove drive, replace them as a set so the load stays evenly distributed.
Send the part number 10 x 2500 Li, along with the profile and length, by WhatsApp or email to request a quote. If you are unsure about the profile or length, include photos of the old belt and the drive nameplate. The team can help confirm the right belt for your application.
Dimensions
- Section
- Z
- Length
- 2500mm
Frequently asked questions
- What does the 10 x 2500 Li marking mean?
- The marking identifies the belt's profile and length. This belt has a Z profile and a 2500 mm length. Use these two values when comparing it to the belt you are replacing.
- How can I confirm this belt fits my drive?
- Check the old belt for a printed profile and length, or measure the outside length. If the marking is unreadable, note the sheave groove width and the center distance between pulleys. Send those details with your quote request.
- Can I replace just one belt on a multi-belt drive?
- On drives that use several belts together, it is common practice to replace them as a set. This helps keep tension and load distribution even across all belts. Confirm the profile and length for each belt before ordering.