V-belt Optibelt 10 x 1900 Li
- Brand
- OPTIBELT
- Category
- Power transmission
- Subcategory
- V-belts
- Section
- Z
- Series
- VB S=C Plus
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
OPTIBELT 10 x 1900 Li belongs to v-belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for 10 x 1900 Li and any equivalents.
The Optibelt VB S=C Plus is a classical V-belt with a Z profile and a length of 1900 mm. Before you fit this belt, inspect the drive and sheaves. Worn grooves or misalignment can shorten belt life and cause slippage.
Check sheave grooves for wear, rust, or embedded debris. A straightedge across the sheave faces shows misalignment. Confirm the sheave profile matches the Z profile and that the belt sits correctly in the groove. Verify that the center distance and tensioning range allow the 1900 mm belt to be installed and tensioned properly.
Inspect the drive for damaged bearings, bent shafts, or loose mounts. Correct any issues before fitting the new belt. Replace belts in sets when multiple belts run on the same drive to keep load sharing even. After installation, recheck tension and alignment.
The Optibelt VB S=C Plus is a classical V-belt. The marking on the back reads 10 x 1900 Li, which identifies the profile and length. We carry this belt and can help confirm it is the right fit for your drive. Send the part number and any drive details by WhatsApp or email for a quote.
Dimensions
- Section
- Z
- Length
- 1900mm
Frequently asked questions
- What should I check on the sheaves before installing this belt?
- Inspect groove wear, rust, and debris. Use a straightedge to check alignment. Confirm the sheave profile matches the Z profile and that the belt sits correctly in the groove.
- How do I identify this Optibelt belt?
- The back of the belt is marked 10 x 1900 Li. The profile is Z and the length is 1900 mm. The series is VB S=C Plus.
- What information should I send for a quote?
- Send the part number 10 x 1900 Li and any drive details you have, such as sheave diameters or center distance. We will confirm the belt or suggest an equivalent.