V-belt Optibelt 10 x 1651 Li

OPTIBELT 10 x 1651 Li belongs to v-belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for 10 x 1651 Li and any equivalents.

When you need a replacement classical V-belt, the marking on the old belt is your best reference. This Optibelt VB S=C Plus belt is identified as 10 x 1651 Li, profile Z, with a length of 1651 mm. Use that marking to confirm you are specifying the same belt.

The back of a worn belt typically shows the profile and length, such as 10 x 1651 Li or Z 1651. The profile Z indicates a classical V-belt cross-section, and 1651 mm is the length. Check the marking on your existing belt before ordering to avoid mismatches. If the marking is worn or unreadable, measure the outside length and compare it to the length given here.

This Optibelt VB S=C Plus belt is a classical V-belt with profile Z and a length of 1651 mm. It is identified by the code 10 x 1651 Li. When you request a quote, include the full marking from your old belt and the part number 10 x 1651 Li. Our team can confirm the belt matches your drive or suggest an equivalent based on the profile and length.

For drives using multiple belts, replace all belts at the same time to maintain even tension. Inspect sheaves for wear, alignment, and buildup that can shorten belt life. After installation, check tension according to your equipment manual and recheck after the first hours of operation. Keep the old belt marking for future reference.