V-belt Optibelt 10 x 1295 Li
- Brand
- OPTIBELT
- Category
- Power transmission
- Subcategory
- V-belts
- Section
- Z
- Series
- VB S=C Plus
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
OPTIBELT 10 x 1295 Li belongs to v-belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for 10 x 1295 Li and any equivalents.
The Optibelt VB S=C Plus 10 x 1295 Li is a classical V-belt with a Z profile and a length of 1295 mm. When you need a replacement, the most reliable approach is to match it to the belt being removed.
Start by reading the marking on the back of the old belt. You are looking for the profile (Z) and the length (1295 mm). If the old belt is worn or the marking is unreadable, measure the outside length and compare it to the 1295 mm dimension. The 10 x 1295 Li marking indicates a top width of 10 mm and a length of 1295 mm; the profile Z confirms the cross-section.
Once you have the profile and length, confirm that the new belt matches exactly. The Optibelt VB S=C Plus 10 x 1295 Li is a classical V-belt, so it is not interchangeable with a narrow V-belt or a cogged belt unless the drive is designed for it. If you are unsure, send us the old belt's marking, the drive's sheave dimensions, or a photo, and we will help you confirm the right belt.
For a quote, provide the part number 10 x 1295 Li or the profile and length. If you are replacing multiple belts on the same drive, let us know the quantity and we can help you source them together. We carry Optibelt belts and can assist with matching your existing setup.
Dimensions
- Section
- Z
- Length
- 1295mm
Frequently asked questions
- How do I confirm the Optibelt 10 x 1295 Li is the right belt for my drive?
- Check the marking on your old belt for the profile (Z) and the length (1295 mm). If it matches, the 10 x 1295 Li is the correct replacement. If the marking is not clear, measure the outside length and compare it to 1295 mm.
- What information do you need to quote the Optibelt 10 x 1295 Li?
- Send us the part number 10 x 1295 Li, or the profile and length from your old belt. If you have a photo of the old belt or the drive, that also helps us confirm the match.
- Can I use a different profile belt if the length is the same?
- No. The profile must match the sheave groove. A Z profile belt has a specific cross-section, and using a different profile can cause poor performance or damage. Always match both profile and length.