V-belt Optibelt 10 x 1180 Li
- Brand
- OPTIBELT
- Category
- Power transmission
- Subcategory
- V-belts
- Section
- Z
- Series
- VB S=C Plus
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
OPTIBELT 10 x 1180 Li belongs to v-belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for 10 x 1180 Li and any equivalents.
This Optibelt VB S=C Plus belt is a classical V-belt with a Z profile and a length of 1180 mm. It is used on industrial drives where a classical V-belt is specified, such as fans, pumps, compressors and other general machinery. To confirm fit, match the profile and length on the belt you are replacing.
The profile Z and the length 1180 mm are the two dimensions to check first. The marking on the back of the old belt usually shows the profile and length; if it reads Z and 1180, this belt matches. If the marking is worn or missing, measure the outside length and the top width to identify the profile.
Classical V-belts like this one are common on drives that do not use a narrow wedge profile. They are found on older equipment and on drives where the pulley groove is sized for a classical belt. Using a narrow profile in a classical groove, or the reverse, will not fit correctly, so confirm the profile before ordering.
Send the part number, the profile and the length from the old belt when you request a quote. If you are replacing a set, include the quantity so all belts on the drive can be matched. Photos of the belt marking and the pulley groove help confirm the correct item.
Dimensions
- Section
- Z
- Length
- 1180mm
Frequently asked questions
- How do I confirm this belt fits my drive?
- Check the marking on the back of the old belt for the profile Z and the length 1180. If the marking is not readable, measure the outside length and the top width, then compare with the profile and length given for this belt.
- Where is this classical V-belt used?
- It is used on industrial drives that call for a classical V-belt with a Z profile, such as fans, pumps and compressors. The drive pulley groove must be sized for a classical profile, not a narrow wedge profile.
- What should I send to request a quote?
- Send the part number, the profile and the length from the old belt, along with the quantity you need. If you are replacing a set, include the number of belts on the drive so they can be matched.