Timing belt Optibelt 075 / H 1025 AFX
- Brand
- OPTIBELT
- Category
- Power transmission
- Subcategory
- Timing belts
- Series
- Alpha Flex
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
OPTIBELT 075 / H 1025 AFX belongs to timing belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for 075 / H 1025 AFX and any equivalents.
When replacing a timing belt, the most reliable approach is to match the belt you are removing. The Optibelt 075 / H 1025 AFX is a timing belt with an H profile and a length of 2603.5 mm. Confirm these two details against the old belt before you request a quote.
Start by locating the marking on the back of the old belt. It should show the profile and the length; for this Optibelt belt, the profile is H and the length is 2603.5 mm. If the marking is worn or missing, measure the belt width and the pitch length, or count the teeth and note the tooth profile. The part number 075 / H 1025 AFX can also be used to identify the correct belt.
Because timing belts are often replaced as part of a drive refresh, inspect the pulleys and tensioners at the same time. Check for worn teeth, cracks, glazing, or oil contamination. If the drive uses multiple belts, replace them as a set to keep loads even. For an accurate quote, send the part number 075 / H 1025 AFX, the profile H, and the length 2603.5 mm, along with the quantity you need.
Dimensions
- Profile
- H
- Length
- 2603.5mm
Frequently asked questions
- How do I confirm this is the right belt for my drive?
- Compare the profile and length on your old belt to the H profile and 2603.5 mm length of the Optibelt 075 / H 1025 AFX. If the old belt is unmarked, measure the pitch length and width, or count the teeth, and share those details with us.
- What information should I send to request a quote?
- Send the part number 075 / H 1025 AFX, the profile H, and the length 2603.5 mm. Also include the quantity you need and any details from the old belt marking. You can send this by WhatsApp or email.
- Can you help if I am not sure about the profile or length?
- Yes. If you are unsure, send us the marking from the back of the old belt or photos of the drive and the belt. We can help confirm the correct belt or suggest an equivalent based on the details you provide.