NTN UKFL206D1 flange bearing 2 holes
- Brand
- NTN
- Category
- Bearing housings
- Subcategory
- Y-bearing unit
- Series
- UKFL2
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
NTN UKFL206D1 belongs to flange bearing 2 holes, part of our Bearing housings range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for UKFL206D1 and any equivalents.
The UKFL2 housing with NTN insert bearing is a two-bolt flange mounted unit that supports a shaft on a flat surface. It handles moderate radial and axial loads and is used where the shaft runs on metal or sheet metal structures, with the flange bolted down and the insert already fitted in the housing.
The series code breaks down into three parts: UK for the insert bearing with taper and adapter sleeve, FL for the two-bolt flange, and 2 for the diameter series. Every reference in the line carries the D1 suffix, which identifies the construction variant of the assembly. The number in the middle sets the size of the insert and housing: a higher number means a larger shaft diameter and a unit with greater capacity.
Typical applications include belt conveyors, sorting belts, bucket elevators, mixers, blowers and packaging lines. The units are common in food plants, cement plants, tanneries, water treatment plants and metalworking shops, where a drive shaft rests on folded sheet metal frames or welded profiles and a simple two-bolt fastening is all that is needed.
When selecting a unit, check the diameter and length of the shaft section that enters the taper, along with the load type and rotational speed. The insert with adapter sleeve mounts on a ground shaft and lets you adjust the axial position before tightening. Confirm that the two flange holes line up, that the housing sits flat on its support, and that the insert is properly lubricated. The housing seal keeps out dust and splashes.
Two-bolt flange units are interchangeable between manufacturers by series and shaft diameter: the same shaft size accepts equivalent references from different brands, provided the hole spacing, housing diameter and insert fastening type match. If you have a part number from another brand or an unidentified part, send it to us and we will identify the compatible alternative for your equipment.
To request a quote for the UKFL2 housing with insert bearing, send the part number or shaft size by WhatsApp or email. Our team replies promptly and can suggest equivalents and help you choose the right variant for your application.
Dimensions
- Bore
- 25 mm
Frequently asked questions
- What does the UKFL2 designation mean?
- UK stands for the insert bearing with taper and adapter sleeve, FL for the two-bolt flange, and 2 for the diameter series. The D1 suffix indicates the construction variant, as seen in references like UKFL205D1 or UKFL210D1.
- How do I choose the correct housing size?
- Begin with the shaft diameter and the section that enters the taper. Then consider the load type and rotational speed. With those details, we can tell you which UKFL2 series reference fits your equipment.
- Can it replace a unit from another brand?
- Yes. Two-bolt flange units are interchangeable by series and shaft diameter when the hole spacing, housing and insert fastening match. Send us the original part number and we will quote the equivalent.