NTN UELFLU205-015D1 flange bearing 2 holes

NTN UELFLU205-015D1 belongs to flange bearing 2 holes, part of our Bearing housings range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for UELFLU205-015D1 and any equivalents.

The NTN UELFLU2 is a ready-to-mount assembly that pairs a two-bolt flange housing with a UEL-style insert bearing. Its extended inner ring and set screw locking make it a straightforward way to support a rotating shaft on a flat surface, and it suits light to medium drive arrangements where alignment is simple.

Reading the code helps when you order. UEL stands for the insert with an extended inner ring and set screws. FL marks the two-bolt flange housing, and the U shows the unit ships assembled. The digits that come next, such as 204, 205 or 206, give the insert size. A suffix like D1 points to a sealing or internal design variation. So UELFLU204D1 uses a 204 insert with the D1 suffix, and UELFLU205-014D1 pairs a 205 insert with a defined shaft diameter.

You will find these units on belt conveyors, packaging lines, mixers, fans and processing equipment in food, chemical and materials plants. The two-bolt flange mounts to sheet metal or structural profiles and is easy to align. Because the inner ring is extended, the insert can sit on a shaft that has no shoulder to locate it.

Selection comes down to shaft diameter and load type. The UELFLU2 series covers both metric and inch shafts, depending on the part number. If dust, water or washdowns are present, pay attention to the insert sealing. During installation, seat the flange on a flat surface, tighten the inner ring set screws with the correct wrench, then confirm the shaft turns freely. The factory lubricant is normally enough to start up, though it is worth checking its condition once the unit is in service.

If the existing equipment carries another make, interchange is based on dimensions: shaft diameter, flange hole spacing and insert type. SKF, FAG, NSK and Timken offer comparable lines, but no single cross-reference covers every case. The reliable route is to send the full part number of the old unit or its main dimensions so MR Industrial Accessories can point you to a compatible option.

To get a quote, send the exact part number from the component or drawing by WhatsApp or email. If you are unsure, a photo of the flange and insert helps identify the series. The team replies promptly and can suggest equivalents or help you choose.