NTN UCFLX09-113D1 flange bearing 2 holes
- Brand
- NTN
- Category
- Bearing housings
- Subcategory
- Y-bearing unit
- Series
- UCFLX
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Other brands for this category
Ask us for alternatives. We check every equivalent against the part number and your application.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
NTN UCFLX09-113D1 belongs to flange bearing 2 holes, part of our Bearing housings range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for UCFLX09-113D1 and any equivalents.
The NTN UCFLX is a two-bolt flange mounted bearing unit that holds a rotating shaft against a flat mounting face. It suits equipment layouts where the shaft runs at a right angle to that surface, and where the housing has to be bolted down and serviced without much fuss.
Reading the code helps you order correctly. The UCFL block tells you this is a flange unit with an insert bearing, and the X marks the heavier housing version in that family. Take UCFLX05-013D1 or UCFLX06-101D1: the digits following the hyphen give the shaft size, while D1 points to a defined seal and locking arrangement. Send the complete number and we quote that exact reference.
You will find these units on conveyors, belts, elevators, mixers, fans and process lines in food, chemical and materials operations. Grain handling equipment, feed plants and aggregate systems are typical homes for them, since two bolts let crews mount the housing onto sheet metal or structural profile. They also fit machines where the shaft sits perpendicular to the mounting face and lubrication points are hard to reach.
When specifying, confirm the shaft diameter and the locking method the insert accepts. The insert seal sets the level of protection against dust and moisture, and a version with an extra oil seal makes sense in dirty surroundings. Clearance and grease fill are set at the factory. During installation, keep the flange flat against its seat and draw the bolts down in a cross pattern so the housing does not distort. Careful shaft alignment matters as well, otherwise the bearing carries extra load.
NTN UCFLX units can be swapped with other makes that follow the same two-bolt flange naming and shaft size. Bring us a competitor number or a part you cannot identify and we will point you to the matching equivalent. Because fit depends on shaft diameter, hole spacing and center height, it pays to verify those three figures before any replacement.
To move ahead, message us on WhatsApp or by email with the part number or the shaft size you need. Our team replies promptly, quotes the exact reference and can suggest equivalents or help you pick the right unit for the equipment.
Dimensions
- Bore
- 1-13/16 in
Frequently asked questions
- What does UCFLX tell me about a flange bearing?
- It identifies a two-bolt flange unit with an insert bearing, in the heavier housing variant of that family. The digits after the hyphen give the shaft size, and D1 indicates a particular seal and locking setup.
- How do I pick the right UCFLX unit for my shaft?
- Start with the shaft diameter and the locking method the insert accepts. Then look at the working environment: dusty or damp conditions call for a better-sealed configuration. Send us those details and we quote the exact part number.
- Can NTN UCFLX flange bearings replace other brands?
- They can be used in place of other makes that share the same two-bolt flange nomenclature and shaft diameter. Send the original part number and we will confirm the compatible reference, checking shaft size, hole spacing and center height.