NTN SFCW2215-208N1 piloted flange bearing

NTN SFCW2215-208N1 belongs to piloted flange bearing, part of our Bearing housings range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for SFCW2215-208N1 and any equivalents.

The NTN SFCW series is a piloted flange mounted unit: a cast iron flange body paired with a ball insert bearing. Bolted to the structure, it supports transmission shafts and keeps alignment simple. The piloted design centers the unit in a machined housing, which suits equipment that needs a rigid, compact support point.

Reading an SFCW code is straightforward once you break it into blocks. The letters describe the housing type and flange shape; the digits that follow point to the shaft diameter and insert size. SFCW2211N1, SFCW2213N1 and SFCW2215N1 are three diameters within the same series. A hyphenated suffix signals a variant: SFCW2211-115N1 and SFCW2213-203N1 cover locking or inch-diameter versions. Every reference carries the N1 suffix, which marks a construction version inside the series.

You will find these units on belt conveyors, bucket elevators, mixers, mills and other process equipment, including food plants, cement plants, tanneries and agro-industrial facilities where dust, moisture and moderate loads are normal. Four bolts fix the piloted flange to sheet metal or cast iron, and the pilot centers the assembly in a machined housing. That makes replacement faster and holds shaft position.

Selection comes down to three items: shaft diameter, insert locking type (set screw, eccentric or adapter) and the sealing the environment demands. During installation, clean the housing, confirm the flange seats without play and align the shaft with the drive equipment. Grease the insert through its built-in fitting at the frequency your application calls for, and check that the seal does not run dry.

Units of this type interchange between manufacturers when flange dimensions, shaft diameter and locking system line up. Before replacing one, compare the centering height, bolt spacing and flange outer diameter. If your part number comes from another brand, send it over and we will point you to the equivalent for the NTN SFCW series.

Send the complete part number on WhatsApp, for example SFCW2213-204N1, and our team will reply with a quote. If the number is not on your list, write to us with the shaft size and flange dimensions instead. We can suggest equivalents and help you settle on the right reference.