NTN KRV26FXLLH/3AS cam follower

NTN KRV26FXLLH/3AS belongs to cam follower, part of our Bearings range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for KRV26FXLLH/3AS and any equivalents.

A cam follower from the NTN KRV series is a stud-type roller bearing that mounts straight onto a cam profile, a guide rail or a rolling track. Its stud-mounted construction lets it carry radial loads in cam-driven or reciprocating motion. Typical settings include automation equipment, material handling systems and machine tools. MR quotes these by part number.

Read the designation in blocks. KRV marks the stud-type cam follower, and the digits that follow set the roller size within the series. Suffixes carry the detail: FX points to an execution with particular sealing or shape characteristics, LLH to the sealing type, and AS to an assembly variant. That explains why KRV22FXLLH/3AS and KRV26FXLLH/3AS share series and suffixes but differ in size. Send the full part number so the right reference is quoted.

On the shop floor these rollers turn up in actuating cams, linear guides, conveyors, packaging machinery, material handling equipment and automation systems. They also appear in presses, bending machines and positioning devices where the wheel tracks a cam or rail. Because it is a precision part, inspect the contact track and the stud before fitting a replacement: a worn track will shorten the life of any new roller.

Selection comes down to outer diameter, width and stud diameter, plus the sealing the environment demands. The LLH suffix denotes a defined level of protection against contamination, so in dusty areas or where chips fly, sealing deserves priority. Install on the matching stud or pin, confirm alignment and apply the specified lubrication. Over-tightening or a track that runs off center introduces parasitic loads and cuts service life.

Cam followers from different makers are identified by their designation and by the main dimensions: outer diameter, width and stud diameter. When a customer sends a competitor's part number or an unidentified part, we compare those measurements and point to the compatible equivalent. Interchangeability is not automatic: two rollers of equal size can differ in sealing, clearance or load capacity, so dimensional verification comes first.

Need an NTN KRV series cam follower? Send the complete part number, or the measurements of the part being replaced, over WhatsApp. MR quotes the exact reference or measurement you specify and answers promptly. We can also advise on sealing and lubrication for your machine's working environment.