NTN KRV16FXLLDOH/L588 cam follower
- Brand
- NTN
- Category
- Bearings
- Subcategory
- Cam follower and support roller
- Series
- KRV
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
NTN KRV16FXLLDOH/L588 belongs to cam follower, part of our Bearings range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for KRV16FXLLDOH/L588 and any equivalents.
The NTN KRV series cam follower is a stud-type roller bearing that handles radial loads and transmits motion directly along cams, tracks, and guides. The stud stays fixed to the machine frame while the outer race rotates against the cam surface. It suits lifting, conveying, and positioning mechanisms that call for high load capacity and resistance to fatigue.
In the KRV designation, the number that follows indicates the outside diameter, and the suffixes describe construction details. Take KRV16FXLLDOH/L588 and KRV19FXLLDOH/L588: the figures give the size, while FX, LL, DO, and H cover sealing, lubrication, and geometry variants. The L588 code after the slash refers to a specific mounting or treatment specification.
Typical installations include drive cams, linear guides, chain conveyors, packaging machines, lifting equipment, and positioning systems. The design absorbs combined loads and tolerates slight misalignment, which helps in environments where dust, chips, or lubricant are present.
When selecting a cam follower, check the outside diameter, track width, sealing type, and internal clearance. Correct alignment between the stud and the raceway matters; excessive misalignment speeds up wear. Proper lubrication and LL sealing keep contaminants out. For high-load applications, confirm the radial and axial load capacity for the size. The stud must be fastened firmly to prevent vibration.
NTN KRV series cam followers interchange with parts from other brands that use the same dimensional nomenclature. Before replacing a unit, compare the main dimensions, sealing type, and lubrication conditions. If you send a photo or the measurements, we can point you to the compatible alternative. Interchangeability depends on keeping tolerances and stud design consistent.
To request a quote for the NTN KRV series cam follower you need, message us on WhatsApp with the complete part number or the measurements. We reply promptly with the quote and the options. We can also help with selection if you share the application and working conditions.
Dimensions
- Bore
- 16 mm
Frequently asked questions
- What does KRV mean in NTN cam followers?
- KRV is the series of cam followers with an integrated stud. The number after it gives the outside diameter, and suffixes such as FX, LL, DO, and H define sealing, lubrication, and geometry. For help reading a full part number, contact us on WhatsApp.
- How do I choose the right cam follower?
- Look at the outside diameter, track width, sealing type, and internal clearance. Check the radial and axial load capacity for the size. If you tell us the application and working conditions, we can advise you on the correct model.
- Are NTN KRV series cam followers interchangeable with other brands?
- They interchange with cam followers from other brands that share the same dimensional nomenclature. When replacing, compare dimensions, sealing, and lubrication. If you have doubts, send us the part number or measurements and we will indicate the compatible alternative.