NTN JELPFL201 flange bearing 2 holes

NTN JELPFL201 belongs to flange bearing 2 holes, part of our Bearing housings range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for JELPFL201 and any equivalents.

The NTN JELPFL2 is a two-bolt flange mounted Y-bearing unit. It arrives factory-assembled, with the cast iron housing and insert bearing ready to bolt down. This configuration supports rotating shafts where the mounting surface is flat, allowing straightforward alignment and quick service. MR Industrial Accessories supplies this line to customers across the United States and Latin America, quoting by part number through WhatsApp or email.

Reading the code helps you order the right unit. JELPFL denotes the two-bolt flange housing with insert bearing. The J and E specify the insert style and how it locks to the shaft. The 2 indicates the housing series. Final digits give the shaft size: JELPFL201, JELPFL202, JELPFL203 and JELPFL204 increase in size. A hyphenated suffix, as in JELPFL201-008 or JELPFL202-009, marks a variant of the same base size, such as an inch bore or a different insert design. Provide the full number and we will quote that exact reference.

You will find these units on conveyors, belts, elevators, mixers, blowers and packaging lines, as well as in washing equipment, food processing, treatment plants and agricultural machinery. The two-bolt flange mounts to sheet metal or structural frames with simple holes. They suit driven shafts that need a compact support with tolerance for misalignment and easy insert replacement when wear occurs.

Selection starts with shaft diameter and insert locking style. Hyphenated suffixes change the bore or the locking method, so include them when ordering. Match the insert seal to the environment; dust, water or frequent washdowns require tighter protection. During installation, set the flange on a clean, flat surface, tighten the two bolts in a cross pattern and confirm the shaft turns freely. Lubricate the insert according to the duty cycle and verify alignment so the bearing does not run under strain.

Two-bolt flange units come from several brands with different nomenclatures. To interchange, compare shaft diameter, hole spacing, hole diameter and center height rather than the part number alone. If you have an unidentified part or another brand's number, we can identify a compatible equivalent and quote the best match. Send a photo of the part and the shaft measurement to get started.

If you need a variant not shown, message us on WhatsApp with the part number or model and we will reply promptly. Our team can also suggest equivalents and help you choose the right unit for your equipment.