NTN JELPF202 flange bearing 3 holes
- Brand
- NTN
- Category
- Bearing housings
- Subcategory
- Y-bearing unit
- Series
- JELPF2
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
NTN JELPF202 belongs to flange bearing 3 holes, part of our Bearing housings range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for JELPF202 and any equivalents.
The NTN JELPF2 is a 3-bolt flange unit with an integrated insert bearing, built for mounting rotating shafts onto flat surfaces. The housing bolts directly to a panel or frame, while the pre-lubricated insert accepts the shaft. This design suits applications needing a rigid, centered support in tight spaces where alignment must be simple.
Part numbers in this series begin with JELPF followed by a size digit, such as JELPF2. Some variants include a hyphenated suffix—for example JELPF201-008, JELPF202-009, JELPF202-010, or JELPF203-011. The digits after the hyphen specify the bore diameter of the insert within the same housing size, so two units with identical flanges can accept different shaft sizes.
Typical installations include conveyors, bucket elevators, mixers, blowers, and processing lines. In food, chemical, and aggregate plants, these flange units are selected for straightforward washdown and fast replacement. They also appear in packaging machinery, industrial washers, and agricultural equipment, where a short shaft must be supported against a wall or machine side.
When specifying a unit, begin with the shaft diameter and the load pattern. The 3-bolt flange performs well under primarily radial loads with minimal moment. Ensure the mounting surface is flat and the bolt holes align. During installation, align the shaft with the insert, tighten the inner ring locking screws, and confirm free rotation. The insert's seal and lubrication determine service life in dusty or wet conditions.
Flange units with inserts are generally interchangeable across brands by size number and shaft diameter, but flange height, hole diameter, and hole position vary by manufacturer. If you have a code from another brand or an unidentified part, we can suggest a compatible alternative. For a quote, send the complete code via WhatsApp or email—for example JELPF204 or JELPF202-010—and our team will respond promptly.
Dimensions
Dimensions and tolerances: Message us the part number on WhatsApp and we'll verify its dimensions and version with the manufacturer's datasheet.
Frequently asked questions
- What does the suffix in JELPF201-008 indicate?
- The suffix after the hyphen identifies the insert's bore size within that housing size. Thus JELPF201 and JELPF201-008 share the same flange but accept different shaft diameters. Provide the full code for an exact quote.
- How do I choose among JELPF201, JELPF202, and JELPF204?
- The size digit corresponds to load capacity and flange dimensions. Select based on your shaft diameter and radial load. Send us the shaft diameter and a photo of the mounting, and we will recommend the appropriate size.
- Can I replace a unit from another brand with an NTN JELPF2?
- Yes, if the shaft diameter and flange dimensions match. Note that flange height and hole positions may differ between manufacturers. Send the original part number via WhatsApp or email, and we will identify the equivalent NTN unit.