NTN JELFD202-009 flange bearing 2 holes
- Brand
- NTN
- Category
- Bearing housings
- Subcategory
- Y-bearing unit
- Series
- JELFD2
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
NTN JELFD202-009 belongs to flange bearing 2 holes, part of our Bearing housings range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for JELFD202-009 and any equivalents.
A two-bolt flange unit from the NTN JELFD2 line pairs a sealed insert bearing with a housing that bolts flat to a frame, panel or machine side. This makes it a practical pick when a shaft needs support close to a surface and the assembly should go together quickly. Typical settings include conveyors, fans, mixers and farm equipment.
Reading the code helps you order the right piece. JELFD tells you it is a two-bolt flange Y-bearing with insert, while the 2 points to the diameter series. The digits that follow, as in JELFD201, JELFD202 or JELFD204, mark the size number. Codes with a hyphen and three digits, such as JELFD201-008 or JELFD202-009, are the inch-shaft versions. Send the full code so the exact reference can be quoted.
Because the flange carries two fastening points, the unit mounts to sheet metal or steelwork with screws, and the shaft lines up without complicated shimming. The insert is self-aligning, so small mounting deviations are absorbed. Sealing keeps grease in and dust and moisture out, which suits conveyors, sorting belts, industrial fans, mixers, food processing equipment and agricultural machinery.
Selection comes down to three things: shaft diameter, whether the load is radial, axial or a combination, and the working environment. Note the flange dimensions and the fastening style as well, since these decide whether a unit from another maker will fit the same spot. Lubricant is packed at the factory; in dirty or wet areas, it pays to inspect the seal now and then. Seat the flange squarely, tighten the screws and keep the shaft aligned.
If you only have a code from another brand, or a part with no markings, the MR team can point you to a compatible option. Interchangeability hinges on flange dimensions, shaft diameter and how the unit is fastened, so have those figures ready.
Dimensions
- Bore
- 9/16 in
Frequently asked questions
- How do I break down the JELFD2 code?
- JELFD stands for a two-bolt flange Y-bearing with insert, and the 2 is the diameter series. The numbers after that, as in JELFD201 or JELFD204, give the shaft size. A hyphenated suffix such as -008 signals an inch variant.
- What information do you need to help me pick a unit?
- Shaft diameter, the load type (radial, axial or combined) and the conditions where it runs. The JELFD2 sealing is aimed at dusty or damp locations. If anything is unclear, send your equipment details and we will help narrow it down.
- Can you match a code from a different brand?
- Yes. Send the other brand's code or the dimensions of an unmarked part and we will suggest a compatible alternative. Flange dimensions, shaft diameter and fastening type decide whether it drops in.