NTN EC-6001JRXZZ deep groove ball bearing

NTN EC-6001JRXZZ belongs to deep groove ball bearing, part of our Bearings range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for EC-6001JRXZZ and any equivalents.

The NTN EC-JRXZZ is a single-row deep groove ball bearing with metal shields on both sides and a stamped steel cage. It handles moderate radial and axial loads in either direction and is commonly found in electric motors, pumps, fans, gearboxes and other power transmission equipment where friction and noise need to stay low.

Reading the code helps when you need to identify or cross a part. The EC prefix denotes the bearing design. The four digits that follow, as in EC-6001JRXZZ, come from the 60 series dimension code, which is the extra-light section. JR and X refer to the cage type and the sealing arrangement. The final ZZ means metal shields are fitted on both sides, keeping lubricant in and dust out. Send the full part number exactly as marked on the part when you request a quote.

These bearings turn up in low and medium power electric motors, centrifugal pumps, draft fans, conveyor belts, machine tools and packaging equipment. Maintenance shops also fit them when a bearing is replaced because of wear or noise. Because the shields are fitted, the bearing suits dusty or moderately humid conditions where an open bearing would need frequent relubrication.

Selection comes down to shaft diameter, housing size and the load the application applies. The 60 series is extra-light, so it is the choice when radial space is tight. The ZZ shield is non-contacting, which keeps friction low and permits higher speeds than a contacting seal. At mounting, check that shaft and housing are aligned, use the correct tools and do not strike the raceway. The grease fill is set at the factory and needs no maintenance in normal service.

Interchange between brands follows the designation system. A deep groove ball bearing with matching dimensions and equivalent suffixes from another maker can be used, but confirm tolerances, internal clearance and seal type first. If you have a part number from another brand or an unidentified bearing, we cross-reference it to the NTN line and give you the compatible reference. We work with each manufacturer's actual nomenclature.