NTN C(CM)-UKFC213AD1 flange bearing 4 holes

NTN C(CM)-UKFC213AD1 belongs to flange bearing 4 holes, part of our Bearing housings range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for C(CM)-UKFC213AD1 and any equivalents.

NTN C(CM)-UKFC series 4-bolt flanged mounted bearings come as a complete assembly that pairs the bearing with its housing. Typical part numbers include C(CM)-UKFC210AD1, C(CM)-UKFC213AD1 and C(CM)-UKFC218AD1. As the middle number changes, so do the unit dimensions.

The unit mounts with its four-bolt flange against a flat surface set at a right angle to the shaft, for example a machine face, a frame or a closing plate. The four fixing points spread the load and hold the unit steady. Because the bearing and housing arrive together, installation and replacement are simpler than handling the two components separately.

A complete designation follows the pattern C(CM)-UKFC plus a three-digit number (210, 211, 213, 215, 216, 217, 218) and the AD1 suffix. All parts—the C(CM)- prefix, UKFC, the number and AD1—belong to the part number and should not be left out. The number indicates the unit size; shaft diameter is confirmed using the full part number.

Before selecting, verify the shaft diameter, the mounting hole spacing and the clearance around the unit. Also consider load, rotation speed and ambient conditions. With those details, identifying the correct part number is straightforward.

Mount the unit on a flat, rigid and clean support, and check alignment with the shaft before final tightening. Tighten the bolts evenly and follow the manufacturer's specified torques. Poor support or a misaligned shaft can shorten bearing service life.

To request a quote, send the full part number, such as C(CM)-UKFC213AD1, and the quantity you need via WhatsApp or email. A photo of the installed unit helps confirm the identification. Our team replies promptly and can suggest equivalents or help you choose.