NTN AELRPP206W3 pillow block bearing

NTN AELRPP206W3 belongs to pillow block bearing, part of our Bearing housings range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for AELRPP206W3 and any equivalents.

The NTN AELRPP2 is a mounted unit that pairs an insert bearing with a pillow block housing, designed to sit on a flat bed or frame and carry a rotating shaft. You will find it in conveyors, fans, mixers and other power transmission equipment. Because the housing and bearing come as one assembly, installation is straightforward and replacement is simple. MR Industrial Accessories supplies this line and helps you match the unit to your shaft and mounting pattern.

Reading the code helps you order the right unit. The letters AEL point to the insert bearing itself, RPP covers the sealing arrangement and housing style, and the 2 that opens the series marks the pillow block family. What follows, as in AELRPP201-008W3 or AELRPP204-012W3, carries the shaft size and the mounting variant. Many references close with the W3 suffix, which sets that code apart as a distinct version inside the series. When a code is unclear, the fastest route is to send it over and confirm.

These units suit plants handling food, cold storage, textiles, cement and agricultural work. Belt conveyors, bucket elevators, mixers, fans and centrifugal pumps are typical hosts. The pillow block shape bolts down on a flat surface and lets you line the shaft up with the rest of the drive. With an insert bearing inside a solid housing, the assembly stands up to dusty, damp or moderately loaded conditions.

Selection starts with the shaft diameter, then the sealing you need for the surroundings: dust, water or vapors. Load and speed conditions matter too. During mounting, the shaft and the housing must line up; misalignment wears both the bearing and the seal faster. Greasing on schedule and snugging the set screws protect service life. On equipment that vibrates, confirm the base is rigid and the anchors are tight.

Units from different makers can be swapped when the key dimensions line up: shaft diameter, hole spacing, height to center and sealing type. NTN, SKF, FAG, NSK and others all offer comparable lines, but check the dimensions and the locking method before you install a substitute. If you only have another brand's code or an unmarked part, we can identify the matching option or quote the exact size.

To get a quote, send the complete code, for example AELRPP201-008W3, or give us the shaft dimensions and the distance between holes. We answer quickly with the option that fits your equipment and can guide you on mounting and lubrication.