NTN 7E-BK3026T needle roller bearing

NTN 7E-BK3026T belongs to needle roller bearing, part of our Bearings range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for 7E-BK3026T and any equivalents.

When a shaft has to carry radial load but the housing leaves little room, an NTN BK series needle roller bearing is often the right answer. It uses a caged needle complement inside an outer ring with a closed end. MR Industrial Accessories supplies this series to maintenance and purchasing teams in the United States and Latin America, and quotes by part number through WhatsApp or email.

Reading the code helps you order correctly. In 7E-BK3026T, the leading 7E marks an execution variant, BK tells you the outer ring is closed at one end, and 3026 covers the bore and width of the assembly. The trailing T identifies a design feature within the series. Always send the full designation as printed on the drawing or on the part you are replacing.

Typical service points include gearboxes, electric motors, pumps, compressors, machine tools and linear motion units. The low radial section lets them fit where a deep groove ball bearing would not, and they also appear in conveyors, lifting equipment and agricultural machinery. A hardened, ground shaft and a mainly radial load are the conditions they expect.

Selection comes down to shaft diameter and tolerance, raceway hardness and finish, radial clearance, and the sealing arrangement the environment demands. Lubrication has to be right, and shaft-to-housing alignment matters because needle rollers do not tolerate misalignment well. Press the outer ring in squarely, keep impact away from the cage, and confirm the ring seats fully in its housing.

Cross-referencing is done by dimensions and design type. A closed-end needle roller bearing from another maker can serve in place of an NTN BK unit when bore, width and execution line up. If you only have an unidentified part or a competitor's number, send it over and we will point you to the matching option. Never guess a designation; compare it against the measured mounting dimensions.

Send the part number or the dimensions by WhatsApp or email and we will come back with a quote. We can also walk you through mounting, lubrication and sealing so the bearing runs under the right conditions.