NTN 24134EMK30D1 spherical roller bearing

NTN 24134EMK30D1 belongs to spherical roller bearing, part of our Bearings range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for 24134EMK30D1 and any equivalents.

When shafts flex or housings are not perfectly aligned, a self-aligning bearing keeps the application running. NTN spherical roller bearings carry two rows of rollers and handle heavy radial loads together with axial loads in either direction. The spherical outer raceway lets the bearing compensate for misalignment on its own, so mounting tolerances can be less strict. These bearings suit equipment where shaft or housing deflection is a normal part of operation.

The 240 series designation tells you a good deal before you open a catalog. The 240 number identifies a spherical roller bearing in a narrow section. The E stands for a high-strength stamped steel cage, while M indicates a machined brass cage. A K means tapered bore with a 1:12 taper. The 30 suffix covers the tolerance range and internal clearance, and D1 marks a special NTN execution, typically with lubrication holes and grooves. Sizes such as 24024EMK30D1, 24026EMK30D1 and 24028EMK30D1 follow the same pattern, with the series number changing as the size grows.

Typical installations include cement plants, crushing operations, mining, steelmaking, paper mills, flour mills, earthmoving equipment and road machinery, as well as large gearboxes, rotary dryers, kilns and vibrating screens. In each of these, the self-aligning behavior and the strength of the brass or stamped steel cage set these bearings apart from rigid designs.

Selection starts with the bore. A cylindrical bore mounts directly, while a tapered bore (K) goes onto an adapter or withdrawal sleeve, which simplifies adjustment and removal. Internal clearance (30) should match the fit and the operating temperature; interference fits and hot running conditions usually call for more clearance. Lubrication matters just as much: use high-viscosity grease or oil and confirm the lubrication ducts line up. Self-alignment covers small mounting errors, but excessive misalignment shortens service life.

Interchange is possible with other brands that use the same dimensional and execution designation. An NTN 24024 EMK30 D1 may match another maker's bearing with a similar basic number and equivalent suffixes, but tolerances and internal clearance should always be checked. The 240, 241, 222 and 223 series work on the same principle and differ in proportions. For an unidentified bearing, send the bore, outer diameter and width and we will identify a compatible alternative.