NTN 22348EMD1 spherical roller bearing
- Brand
- NTN
- Category
- Bearings
- Subcategory
- Spherical roller bearings
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Decoding NTN 22348EMD1
- 223Series
- Spherical roller bearings, 223 series. Series differ in outside diameter and width even when the bore is the same.
- 48Bore
- Bore 240 mm (48 × 5).
- EMD1Suffix
- NTN suffix: identifies the variant, such as seals or shields, cage, internal clearance or other features.
22348 is the standard ISO basic designation, which sets the bearing type, series and bore.
Description
NTN 22348EMD1 measures 240 mm across the bore and 500 mm across the outside diameter; its width is 155 mm (240 x 500 x 155 mm).
NTN 22348EMD1 belongs to spherical roller bearing, part of our Bearings range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for 22348EMD1 and any equivalents.
NTN spherical roller bearings with the EMD1 suffix cover a wide range of series and sizes, from 22208EMD1 to 23148EMD1 and 24064EMD1. All share a common design: two rows of rollers running on a spherical raceway in the outer ring. Because dimensions vary with each part number, a replacement requires the complete designation.
The spherical raceway in the outer ring lets these bearings accommodate shaft misalignment and deflection. They handle high radial loads and axial loads in both directions. This makes them suitable for equipment subject to shocks, vibrations, or where perfect alignment is difficult to maintain.
The part number combines a five-digit number with the EMD1 suffix. The first digits indicate the series: 22, 23, and 24 are different series, and within each series the size changes. The EMD1 suffix is part of the designation and must match exactly; dimensions depend on the specific part number.
Typical applications include vibrating screens, mills, conveyor belts, industrial fans, and gearboxes. In such demanding environments, an incorrectly identified replacement can lead to unplanned downtime. Confirming the part number before ordering is recommended.
During mounting, follow the manufacturer's fits for shaft and housing. If the fit is tight, heat the inner ring in a controlled manner, avoiding direct flame. Check clearance and lubrication, as these bearings operate under high loads. Clean, careful mounting directly affects service life.
To request a quote, send the full part number, including the EMD1 suffix, and the quantity via WhatsApp or email. Our team responds promptly and can suggest equivalents or help with selection.
Dimensions
240 x 500 x 155 mm (d x D x B): boundary dimensions for basic designation 22348, according to ISO 15.
- Bore
- 240 mm
- Outside diameter (D)
- 500mm
- Width (B)
- 155mm
SKF and other brands, same size
Other brands' pages with basic designation 22348: 240 x 500 x 155 mm (d x D x B) per ISO 15.
- Need the SKF 22348? We can also quote:22348 CC/W3322348 CCK/W3322348 CC/C3W332 more →
- FAG22348-BEA-XL-MB122348-BEA-XL-K-MB1
- LINK-BELT22348LB22348LBK22348LBC31 more →
- NSK22348CAME422348CAMKE4
- RKB22348
- TIMKEN22348EMB
What they share are the ISO 15 boundary dimensions, not the specs: seals or shields, internal clearance, cage and load rating may vary with brand and suffix. Every quote is by full part number.
Frequently asked questions
- NTN 22348EMD1 bearing: what are its dimensions?
- NTN 22348EMD1 measures 240 mm across the bore and 500 mm across the outside diameter; its width is 155 mm (240 x 500 x 155 mm). Those are the boundary dimensions standardized in ISO 15 for basic designation 22348.
- What advantage does a spherical roller bearing offer?
- Its spherical raceway compensates for shaft misalignment and supports high radial and axial loads in both directions. It is used in applications with shocks or vibrations.
- Is the EMD1 suffix mandatory when ordering?
- Yes. It is part of the full designation and must be provided to identify the correct bearing.
- How can I confirm the part number of a used bearing?
- Read the number engraved on the ring. If it is worn off, measure the bore, outside diameter, and width, and send us the dimensions with a photo.