NTN 22206EMKW33 spherical roller bearing
- Brand
- NTN
- Category
- Bearings
- Subcategory
- Spherical roller bearings
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Decoding NTN 22206EMKW33
- 222Series
- Spherical roller bearings, 222 series. Series differ in outside diameter and width even when the bore is the same.
- 06Bore
- Bore 30 mm (06 × 5).
- EMKW33Suffix
- NTN suffix: identifies the variant, such as seals or shields, cage, internal clearance or other features.
22206 is the standard ISO basic designation, which sets the bearing type, series and bore.
Description
NTN 22206EMKW33 measures 30 mm across the bore and 62 mm across the outside diameter; its width is 20 mm (30 x 62 x 20 mm).
NTN 22206EMKW33 belongs to spherical roller bearing, part of our Bearings range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for 22206EMKW33 and any equivalents.
When shafts deflect or alignment between housing and shaft is less than perfect, an NTN spherical roller bearing keeps the assembly running. This self-aligning design uses two rows of rollers and a spherical outer raceway, so it carries heavy radial loads along with axial loads in either direction. Cylindrical or tapered bores are available, along with different cage and sealing options.
Reading the code helps you order the right variant. Take 22205EMKW33: the 22205 block gives the size, E stands for higher-capacity rollers, M for a machined brass cage, K for a tapered bore, and W33 for the lubrication groove and holes in the outer ring. A leading asterisk marks a special execution. Suffix changes point to other cages, seals or shields, so check each character against your application.
These bearings show up in mining, cement, steel, pulp and paper, and food processing equipment. Typical examples include conveyor belts, mills, mixers, centrifugal pumps and industrial fans. Because they tolerate small angles between shaft and housing, they suit long shafts and assemblies where thermal growth or load deflection causes misalignment. They also handle vibration and moderate impact.
Selection starts with radial and axial load, speed, and the surrounding environment. Contaminated conditions call for sealed or shielded versions. A tapered bore (K) mounts on an adapter sleeve and lets you set internal clearance. Grease or oil lubrication must match speed and temperature. During mounting, align the bearing correctly from the start and avoid impacts that could dent rollers or raceways.
NTN spherical roller bearings interchange with other brands that use the same dimensional nomenclature, such as SKF, FAG, NSK or Timken. Tolerances and internal clearance can differ between manufacturers, so verify them. When replacing a bearing, compare suffixes to preserve sealing, cage and lubrication characteristics. MR Industrial Accessories can help you find the correct equivalent from the original code.
Need an NTN spherical roller bearing? Send the code or dimensions through WhatsApp or email. The team replies promptly, quotes the right variant for your equipment, and can advise on mounting and lubrication to support bearing service life.
Dimensions
30 x 62 x 20 mm (d x D x B): boundary dimensions for basic designation 22206, according to ISO 15.
- Bore
- 30 mm
- Outside diameter (D)
- 62mm
- Width (B)
- 20mm
SKF and other brands, same size
Other brands' pages with basic designation 22206: 30 x 62 x 20 mm (d x D x B) per ISO 15.
- Need the SKF 22206? We can also quote:22206 E22206 EK22206 E/C36 more →
- FAG22206-E1-XL22206-E1-XL-K
- NSK22206CE422206CKE4
- RKB22206
- TIMKEN22206EJ22206EM
What they share are the ISO 15 boundary dimensions, not the specs: seals or shields, internal clearance, cage and load rating may vary with brand and suffix. Every quote is by full part number.
Frequently asked questions
- NTN 22206EMKW33 bearing: what are its dimensions?
- NTN 22206EMKW33 measures 30 mm across the bore and 62 mm across the outside diameter; its width is 20 mm (30 x 62 x 20 mm). Those are the boundary dimensions standardized in ISO 15 for basic designation 22206.
- What does the K suffix mean on an NTN spherical roller bearing?
- K indicates a tapered bore with a 1:12 taper. It allows mounting on an adapter sleeve or a tapered shaft, which simplifies setting internal clearance and securing the bearing. This option is common where mounting precision matters.
- How do I decide between a brass cage and a steel cage?
- The machined brass cage (M) is stronger and suits high-speed or high-load running. A stamped steel cage is lighter and more economical for normal conditions. Base the choice on speed, load and the working environment.
- What advantages does a spherical roller bearing offer over a deep groove ball bearing?
- A spherical roller bearing carries higher radial and axial loads and permits angular misalignment between shaft and housing. A deep groove ball bearing does not tolerate misalignment and has lower load capacity. For long shafts or assemblies with deflection, the spherical roller bearing is the better fit.