NSK UKTX13D1;HA2313 take-up bearing
- Brand
- NSK
- Category
- Bearing housings
- Subcategory
- Y-bearing unit
- Series
- UKTX
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
NSK UKTX13D1;HA2313 belongs to take-up bearing, part of our Bearing housings range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for UKTX13D1;HA2313 and any equivalents.
A take-up bearing housing from the NSK UKTX line pairs a cast iron frame with an insert bearing to keep proper tension on chain and belt drives. It is the right choice when the shaft does not line up with the drive. MR Industrial Accessories LLC supplies this series to maintenance and purchasing teams throughout the United States and Latin America.
The UKTX code works like this: the digits after the letters give the unit size, so UKTX09, UKTX10, UKTX11, UKTX13, UKTX15 and UKTX16 are all different sizes. The D1 suffix tells you which insert bearing variant is installed. The code after the semicolon, for example HA2309 or HA2310, identifies the adapter sleeve and its dimensions. Always order by the complete code shown on the part or drawing.
You will find these units on chain conveyors, bucket elevators, belt conveyors and belt drives in food processing, cement, mining and logistics operations. Their sliding frame lets you adjust the bearing position to take up chain stretch or wear without stopping the line.
When selecting a housing, check the shaft diameter, the insert mounting type and the direction of the load. Bolt the frame to a rigid, aligned base. Tighten the adapter sleeve with the correct lock nut to lock the insert onto the shaft. The bearing comes pre-lubricated, but in dusty or damp conditions inspect the seal. Keeping the housing aligned with the drive avoids side loads that reduce service life.
Replacing a take-up housing from another brand is mostly a matter of matching three dimensions: shaft diameter, hole spacing and overall height. Equivalent series can use a different mounting system, so confirm the insert code before swapping. MR Industrial Accessories LLC quotes the exact code or size you need and points out a compatible alternative when one exists.
Send the UKTX code from your equipment by WhatsApp or email, with a photo if you have one. We also handle inquiries about other sizes in the UKTX series and about take-up housings for specific applications.
Dimensions
- Bore
- 2 3/16 in
Frequently asked questions
- What does the D1 suffix mean on a UKTX housing?
- The D1 suffix denotes a specific insert bearing construction within the UKTX series. Main mounting dimensions stay the same, but the internal design and sealing differ. For replacement, use the full code marked on the part.
- How do I choose the correct UKTX take-up bearing housing?
- Start with the shaft diameter, the distance between mounting holes and the mounting type. With those details and the insert code, you can match the right housing. If anything is unclear, send a photo and dimensions and we will help.
- Can I replace another brand's take-up housing with an NSK UKTX unit?
- Often yes, if the mounting dimensions and shaft diameter line up. Equivalent series may use a different mounting system, so verify the insert code. We can suggest a compatible alternative for your application.