NSK UKFX16D1;HA2316 flange bearing 4 holes

NSK UKFX16D1;HA2316 belongs to flange bearing 4 holes, part of our Bearing housings range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for UKFX16D1;HA2316 and any equivalents.

A UKFX unit from NSK pairs a four-bolt flange housing with an insert bearing, giving you a ready-to-mount assembly for supporting rotating shafts on flat surfaces. The housing bolts down through four holes, while the insert grips the shaft. It suits equipment that needs firm support and simple alignment without a complex mounting arrangement.

The UKFX code covers a family of four-bolt flange housings that accept an insert bearing. The digits after UKFX tell you the shaft size the insert is made for: UKFX09 fits a 45 mm shaft, UKFX10 a 50 mm shaft, UKFX11 a 55 mm shaft, UKFX13 a 65 mm shaft, UKFX15 a 75 mm shaft and UKFX16 an 80 mm shaft. A suffix such as D1 marks a construction variant in the series. Codes like HA2309 or HA2310 identify the adapter sleeve that goes with the unit. With these pieces of information you can order the complete assembly or just the components you need.

These flange units show up in many industrial settings: belt conveyors, bucket elevators, mixers, mills, pumps, fans and process equipment in food, chemical and aggregate plants. The four-bolt flange makes them easy to bolt to a flat surface and helps you line up the shaft accurately. Because the insert is self-aligning, the unit absorbs small misalignments, which keeps maintenance simpler in dusty or damp conditions.

When choosing a UKFX housing, look at the shaft diameter, the radial and axial loads the application will produce, and the environment where it will run. The insert typically has labyrinth or contact seals that hold grease in and keep contaminants out. You mount the insert on the shaft using the adapter sleeve, which is tightened with a lock nut. Check that the flange sits flat and lubricate as the manufacturer recommends to get the most from the unit.

For equivalents, NSK UKFX housings can be swapped with units from other makers that use the same four-bolt flange layout and matching shaft diameters. When you request a quote, compare the flange dimensions, the hole spacing and the shaft diameter. If you have a part number from another brand or an unmarked part, MR Industrial Accessories can point you to a compatible option. Interchangeability holds as long as the critical mounting dimensions line up.

To get a quote for a UKFX housing with NSK insert bearing, send the full part number by WhatsApp, for example UKFX09D1;HA2309. MR Industrial Accessories will quote that number or the exact size you specify. If you need a variant that is not shown, message us with the model and we will get back to you promptly.