NSK UKFLX05D1;HE2305 flange bearing 2 holes

NSK UKFLX05D1;HE2305 belongs to flange bearing 2 holes, part of our Bearing housings range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for UKFLX05D1;HE2305 and any equivalents.

This unit pairs a UKFLX two-bolt flange housing with an NSK insert bearing, giving you a bolt-on way to support a rotating shaft on a flat surface. Because the insert comes already fitted in the housing, installation is straightforward and the footprint stays compact. Typical jobs are those where the shaft has to be held firmly but the mounting area is tight.

Reading the code helps you order the right replacement. UK means the housing takes an insert bearing with an adapter sleeve, FL tells you it is a two-bolt flange pattern, and X marks the size or variant within the series. A suffix such as D1 in UKFLX05D1 points to a particular seal or sealing arrangement. The HE2305 reference that ships with the assembly is the tapered sleeve used to lock the bearing onto the shaft.

You will find these units on conveyors, belts, elevators, mixers and packaging lines, as well as in food, chemical, cement and aggregate processing where dust, moisture or washdowns are part of daily operation. The two-bolt flange bolts straight to sheet metal or angle iron after simple drilling, so existing structures usually need no modification.

Shaft diameter, the way the insert is fixed and the sealing the environment demands are the three things to check when selecting. The HE tapered sleeve simplifies fitting and removal because you do not have to strike the bearing. Set the flange flat against its surface, tighten the bolts in a cross pattern, and confirm the shaft lines up with the driven equipment. Follow the duty cycle for lubrication and inspect the seal whenever leaks show up; good alignment is what keeps the insert running well.

Mounted units come in a range of brands and equivalent series. Give us the part number from any brand and we will cross it by dimensions and flange pattern to find the compatible option. What matters for interchangeability is the shaft diameter, the hole spacing and the fixing method, not the series name alone. If the part carries no marking, a photo plus the main dimensions is enough for us to point you to the closest match.

Send the part number or shaft size over WhatsApp or email and our team will get back to you with a quote. We can also suggest equivalents and help you choose if you are replacing a mounted unit and the reference is no longer readable.