NSK UKFL326D1;H2326 flange bearing 4 holes

NSK UKFL326D1;H2326 belongs to flange bearing 4 holes, part of our Bearing housings range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for UKFL326D1;H2326 and any equivalents.

The NSK UKFL is a flange-mounted bearing unit that bolts to a frame and accepts a shaft through a taper sleeve insert. The cast iron housing carries the insert, which locks onto the shaft with a nut and lock washer rather than a press fit. This arrangement suits equipment where the bearing must be installed or removed with limited access, and it handles moderate radial and axial loads in conveying, agricultural, food processing and similar duty.

Reading the code helps when you order or cross-reference. UK marks the taper sleeve insert, FL indicates the four-bolt flange, and the following number gives the housing size. In UKFL324D1;H2324, UKFL326D1;H2326 and UKFL328D1;H2328, the D1 suffix identifies a construction variant of the insert, while the code after the semicolon is the taper sleeve supplied with the unit. Together these elements set the shaft diameter and the overall unit size.

Typical installations include conveyor belts, bucket elevators, mixers, mills, slaughterhouse lines and food plants. The same units appear on seeders, harvesters and in ventilation or pumping systems where the flange can be fastened to a plate or profile. The cast iron housing stands up to industrial conditions, and the sealed insert helps retain lubricant where dust or moisture is present.

Selection starts with the shaft diameter and the direction of the load: radial, axial or combined. The taper sleeve insert is tightened with a nut and lock washer, which allows internal clearance to be adjusted and provides a secure fit without a press. Make sure the flange sits flat and the four bolts align before tightening to avoid distortion. In dirty environments, lubrication and sealing have a direct effect on service life.

UKFL units from various suppliers share flange dimensions and shaft diameters, so they are often interchangeable. For a replacement, sending the complete code including the sleeve is the most reliable way to identify the exact equivalent. MR Industrial Accessories LLC supplies the NSK brand and can quote the reference on your equipment or the size you specify.

To request a quote, send the housing code, shaft diameter or a photo of the part by WhatsApp or email. The team quotes the exact code or size and, when applicable, points out a compatible alternative. With that information, a technical response follows promptly.