NSK UKFL215D1;HE2315X flange bearing 4 holes
- Brand
- NSK
- Category
- Bearing housings
- Subcategory
- Y-bearing unit
- Series
- UKFL
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
NSK UKFL215D1;HE2315X belongs to flange bearing 4 holes, part of our Bearing housings range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for UKFL215D1;HE2315X and any equivalents.
The UKFL from NSK is a four-bolt flange unit that pairs a cast iron housing with an insert bearing. The bearing has an extended inner ring and is locked to the shaft with set screws. It provides stable shaft support where mounting must be straightforward and the connection secure.
In the UKFL code, UK identifies the insert bearing type with extended inner ring, while FL denotes the four-bolt flange housing. The digits that follow give the shaft diameter. A D1 suffix points to a specific insert construction variant. For HE codes, the number indicates the shaft diameter in inches. Together, these references span a range of shaft sizes.
Typical installations include conveyors, belt systems, elevators, agricultural equipment, packaging lines, and general production machinery. The four-bolt flange mounts to flat surfaces, frames, or steel structures, holding shafts that turn at moderate speeds. Because the housing is cast iron and the insert is sealed, the unit handles dusty or damp conditions well.
When selecting a unit, confirm the shaft diameter and the load type. UKFL units accommodate moderate radial and axial loads. The insert is pre-lubricated and sealed at the factory; under heavy duty cycles, relubricate according to the application. During installation, make sure the flange sits flat and tighten the set screws onto the shaft without marring it. Proper alignment reduces stress and supports long service life.
NSK UKFL housings interchange with other brands that use the same flange standard and shaft diameter. If you have a competitor's code, we can identify the equivalent. We can also quote the exact size you need. Send the code or measurements via WhatsApp and we will respond promptly.
MR Industrial Accessories supplies the NSK line of insert bearing housings. Whether you need a UKFL206D1, UKFL210D1, or another reference in the series, message us on WhatsApp with the code for a quote. We also help you choose the right unit for your application.
Dimensions
- Bore
- 2 1/2 in
Frequently asked questions
- What does UKFL mean in a housing with insert bearing?
- UKFL designates a family of four-bolt flange housings with insert bearing. UK refers to the insert type with extended inner ring, and FL to the square or rectangular flange. The number that follows indicates the shaft diameter.
- How do I choose the UKFL housing for my shaft?
- Measure the shaft diameter and select the matching code. If you have doubts, ask us on WhatsApp.
- Are NSK UKFL housings compatible with other brands?
- Yes, NSK UKFL units follow standardized dimensions, so they can be interchanged with equivalent housings from other brands that respect the same flange standard and shaft diameter. If you send us the code from another brand, we will tell you the equivalent.