NSK UKFCX15D1;HE2315X flange bearing 4 holes
- Brand
- NSK
- Category
- Bearing housings
- Subcategory
- Y-bearing unit
- Series
- UKFCX
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
NSK UKFCX15D1;HE2315X belongs to flange bearing 4 holes, part of our Bearing housings range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for UKFCX15D1;HE2315X and any equivalents.
The NSK UKFCX Y-bearing unit consists of a 4-bolt flange housing and an insert bearing, supplied ready for installation. It supports rotating shafts where a front-mounted arrangement with rigidity and alignment is needed. MR Industrial Accessories LLC provides this line to customers throughout the United States and Latin America, and quotes the exact part number you specify through WhatsApp or email.
The UKFCX code pairs the flange housing series with the insert bearing. The figure after it denotes the housing size, which maps to a particular shaft diameter. A D1 suffix signals a variant in sealing and insert design. When the code includes HE, as in HE2306X, that reference identifies the adapter sleeve used with the unit. Reading these elements correctly lets you order either the complete assembly or the right replacement component.
Typical applications include conveyors, belts, mixers, blowers and packaging lines. In food, chemical and aggregate plants, where dust or moisture is present, the 4-bolt flange mounts to sheet metal or structural framing with straightforward alignment. Because the unit is sealed, maintenance is simplified and the risk of bearing contamination is reduced.
Selection depends on shaft diameter and mounting method. The UKFCX insert is designed for taper sleeve mounting, which eases adjustment and removal. Confirm that the flange offers sufficient rigidity and that the mounting surface is flat. The unit is pre-lubricated; during service, follow the greasing interval appropriate to operating conditions. Proper alignment between housings avoids side loads and supports service life.
If your existing code comes from another manufacturer, we can cross-reference it and propose an equivalent unit. Interchangeability relies on principal dimensions and insert type rather than the exact code. Send us the code or shaft size and we will identify the compatible option. Our range also includes split plummer block housings and sheaves manufactured in-house to complete your equipment.
To request a quote, send the UKFCX code you need, the shaft size or a photo of the part via WhatsApp or email. Our team replies promptly, can suggest equivalents and help you choose the correct unit.
Dimensions
- Bore
- 2 1/2 in
Frequently asked questions
- What does the D1 suffix mean on UKFCX housings?
- The D1 suffix denotes a design variant of the insert bearing, usually related to the sealing type and mounting configuration. It does not alter the unit's main dimensions. If your equipment specifies D1, send us the full code and we will quote the equivalent version.
- How do I determine the shaft size for my housing?
- The number following UKFCX indicates the housing size, which corresponds to a specific shaft diameter. If you are unsure, measure the shaft with a caliper and send us the measurement; we will identify the matching code.
- Can I replace a housing from another brand with an NSK UKFCX?
- Yes, provided the flange dimensions, shaft diameter and insert type align. Interchangeability is based on standardized dimensions, not the manufacturer's code. Share the original code or measurements and we will offer a compatible unit.