NSK UKFC211D1;HE2311XY flange bearing 4 holes
- Brand
- NSK
- Category
- Bearing housings
- Subcategory
- Y-bearing unit
- Series
- UKFC
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
NSK UKFC211D1;HE2311XY belongs to flange bearing 4 holes, part of our Bearing housings range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for UKFC211D1;HE2311XY and any equivalents.
This NSK UKFC unit pairs a cast iron flange housing with an insert bearing that has an extended inner ring. It is a four-bolt flange assembly used to support rotating shafts where mounting speed, alignment, and straightforward replacement matter. You will find it in light and medium-duty transmission applications.
The UKFC code covers a family of square flange housings with insert bearings. The number after the letters gives the shaft size: UKFC211D1, for instance, fits a 55 mm shaft and uses adapter HE2311XY. The D1 suffix marks a construction variant of the insert, and XY shows whether the adapter thread is metric or inch. Reading these codes correctly lets you order the exact replacement.
Typical equipment includes belt conveyors, mixers, fans, centrifugal pumps, food machinery, and packaging lines. The four-bolt flange mounts easily on sheet metal or profile structures, while the extended inner ring simplifies fitting to the shaft without extra machining.
When selecting a unit, confirm shaft diameter, mounting style, and working conditions. The insert seal may be basic or include an extra lip seal for dusty or damp areas. Lubrication is applied at the factory and should be checked according to the duty cycle. During installation, line up the flange with the holes and tighten bolts evenly to prevent distortion that could alter internal bearing clearance.
NSK UKFC housings interchange with other brands that follow the same nomenclature and standardized dimensions. You can replace one with an equivalent unit from another manufacturer as long as shaft dimensions, hole spacing, and center height match. MR Industrial Accessories can help you identify a suitable equivalent without affecting equipment operation.
To request a quote, send the complete code by WhatsApp or email. If the designation is unclear, include a photo of the part or the shaft and flange dimensions. The team replies promptly and can suggest equivalents or help you choose.
Dimensions
Dimensions and tolerances: Message us the part number on WhatsApp and we'll verify its dimensions and version with the manufacturer's datasheet.
Frequently asked questions
- What does UKFC mean in a housing with bearing?
- UKFC designates a series of square flange housings with insert bearing. The letters UK indicate an insert with extended inner ring, and FC the housing shape. The following number gives the shaft diameter in millimeters or inches, depending on the system.
- How do I choose the right UKFC housing for my shaft?
- Measure the shaft diameter, then check the flange hole spacing and center height. With those figures you can pick the matching UKFC code. If the shaft has special tolerances, send us the details on WhatsApp and we will advise on the best option.
- Are NSK UKFC housings interchangeable with other brands?
- Yes, UKFC housings use standardized dimensions, so they are usually interchangeable between brands with the same nomenclature. Always verify shaft dimensions, holes, and center height. If you need an equivalent, send the original code and we will help you find it.