NSK UKF324D1;H2324 flange bearing 4 holes
- Brand
- NSK
- Category
- Bearing housings
- Subcategory
- Y-bearing unit
- Series
- UKF
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
NSK UKF324D1;H2324 belongs to flange bearing 4 holes, part of our Bearing housings range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for UKF324D1;H2324 and any equivalents.
This 4-bolt flange unit comes fully assembled: a cast iron housing, a spherical roller insert bearing and a mounting sleeve. It supports rotating shafts where front fastening is used and a degree of self-alignment is required. MR Industrial Accessories LLC supplies this line to plants and workshops across the United States and in several Latin American countries.
Break the UKF code into its parts to read it correctly. UK points to the insert bearing with a taper for an adapter sleeve, F to the 4-bolt flange housing, and the number gives the size. In UKF324D1;H2324, UKF326D1;H2326 and UKF328D1;H2328, the D1 suffix marks the insert execution, while H2324, H2326 or H2328 identifies the sleeve that mounts on the shaft. With that arrangement, a shaft without a shoulder can be used, and a precision lock nut sets the bearing.
Typical installations include conveyors, material handling systems, mills, mixers, blowers and other process equipment. The 4-bolt flange simplifies anchoring to sheet metal or structural steel, and the spherical roller insert compensates for slight shaft misalignment relative to the mounting surface.
Selection starts with shaft diameter and taper, then the matching H sleeve, and finally the sealing needed for the environment: dust, water or frequent washdowns. Before mounting, clean the seat, confirm the flange sits flat, and tighten the sleeve nut following the manufacturer's procedure. Grease passes through the channel in the housing, and checking clearance after the first hours of running is recommended.
Cross-brand matching is done by part number and by shaft and flange hole dimensions. Bring a competitor's number or an unidentified part, and MR Industrial Accessories LLC can point out the compatible alternative and quote the complete assembly with its sleeve. Series and sealing determine interchangeability, not diameter alone.
To get a quote, send the UKF part number from the nameplate or the old part by WhatsApp or email, along with the shaft diameter and a photo of the mounting. The team replies promptly, can suggest equivalents and helps you choose the right H sleeve for the equipment.
Dimensions
- Bore
- 110 mm
Frequently asked questions
- What does UKF mean on a flange unit with insert bearing?
- UK stands for the insert bearing with a taper for an adapter sleeve, F for the 4-bolt flange housing, and the number for the size. The code after the semicolon, such as H2324, is the mounting sleeve that fits the shaft.
- How do I pick the H sleeve for a UKF flange unit?
- Match the sleeve to the shaft diameter and taper. The H code shown with the UKF already indicates the correct combination. If you don't have it, send the shaft size and MR will quote the assembly.
- Where is this flange unit used in industry?
- It appears in conveyors, mills, mixers, blowers and process equipment that need front support and self-alignment. Food, cement, mining and paper plants are common settings.