NSK UKCX10D1;HS2310 cartridge bearing

NSK UKCX10D1;HS2310 belongs to cartridge bearing, part of our Bearing housings range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for UKCX10D1;HS2310 and any equivalents.

The NSK UKCX series combines a Y-bearing housing and an insert bearing in one cartridge unit that is ready to bolt on and supports rotating shafts in transmission equipment. It suits machines that need a compact, self-aligning assembly that can be swapped out as a whole, and it is widely found on production, transport and process lines exposed to dust, moisture or regular washdown.

Reading the code helps you order the right piece. The letters point to the housing family and the insert style, while the digits in the middle track the shaft size. In UKCX06D1, UKCX07D1, UKCX10D1, UKCX11D1 and UKCX12D1, that middle number steps up with the shaft diameter, and D1 marks the insert construction variant. Each reference also carries an HS code such as HS2306 or HS2312, which names the adapter sleeve that clamps the insert onto the shaft. Quote the full code exactly as it appears on the nameplate or the old part.

Typical service includes belt and roller conveyors, mixers, mills, elevators, packaging belts and process equipment in food, chemical, cement and aggregate plants, as well as agricultural machinery and pumping or ventilation drives. The housing takes up slight misalignment, and because the unit is replaced complete, maintenance crews avoid long downtime on lines that run almost continuously.

Selection comes down to three things: shaft diameter, how the insert locks to the shaft, and the working environment. The insert seal determines how well the unit handles dust, water and washdown, so reinforced protection is worth considering in damp or particle-heavy areas. Use the lubricant specified for the insert and renew it according to the duty cycle. When mounting, seat the housing on a flat, rigid surface, line the shaft up with the equipment, then tighten the adapter sleeve or locking screws to the correct torque so the insert is not distorted.

Units of this type interchange between brands by code and by dimensions, since the same shaft diameter and housing style usually exist across several manufacturers. Before replacing one, check the housing geometry, the position of the mounting holes and the way the insert is adjusted. Send the original part code, or a photo with dimensions, by WhatsApp and the team can suggest equivalents and help you choose the right reference.