NSK UKCX08D1;HE2308X cartridge bearing
- Brand
- NSK
- Category
- Bearing housings
- Subcategory
- Y-bearing unit
- Series
- UKCX
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
NSK UKCX08D1;HE2308X belongs to cartridge bearing, part of our Bearing housings range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for UKCX08D1;HE2308X and any equivalents.
The UKCX mounted bearing unit from NSK pairs a housing with a taper bushing insert. This design lets you mount the unit on an unmachined shaft and fine-tune radial clearance through the bushing. It is a practical choice for belt drives, conveyors and other industrial equipment where the shaft needs secure support and the installation has to stay simple.
The UKCX code tells you what you are working with. The letters UKCX mark the housing series that takes a taper bushing insert. In UKCX06D1 and UKCX08D1, the two digits after UKCX give the nominal shaft size in inches: 06 for 3/4 inch and 08 for 1 inch. D1 is the insert construction variant. The companion adapter sleeve appears as HE2306X or HE2308X, where HE is the sleeve prefix, the number is the series and X identifies the thread type. With these pieces of the code you can order the complete assembly or individual components.
You will find these units in belt conveyors, bucket elevators, mixers, mills, food processing machines and agricultural equipment. They also show up in fans, centrifugal pumps and belt drive systems. Because they handle radial loads and some axial thrust, they suit arrangements that need accurate shaft support and can take tough operating conditions.
Selecting a UKCX unit starts with shaft diameter, load type and the environment around the equipment. The taper bushing gives you precise adjustment and makes mounting and dismounting easier without harming the shaft. Check alignment between housings and confirm radial clearance after mounting. Lubrication and sealing against dust and moisture help the unit last. For vibrating or heavily loaded equipment, pick a housing with enough rigidity and bolt it firmly to the structure.
NSK UKCX housings can be interchanged with units from other makers that share the same mounting standard and dimensions. The UKCX designation is used by several manufacturers, though suffixes can differ. When replacing an existing unit, compare the main dimensions and the fixation type. If you only have a sample or shaft measurements, we can help identify the part. Send your part number or details through WhatsApp or email and our team will reply promptly, suggest equivalents and assist with selection.
Dimensions
- Bore
- 1-1/4 in
Frequently asked questions
- What does UKCX06D1 mean?
- UKCX is the housing series for taper bushing insert bearings. The 06 stands for a 3/4 inch shaft diameter. D1 is a construction variant of the insert. A complete code may also include the HE adapter sleeve, such as HE2306X.
- How do I mount a UKCX housing with taper bushing?
- Insert the taper bushing into the bearing, then tighten the nut to secure the assembly on the shaft. Align the housings and check radial clearance after adjustment. Proper lubrication and sealing support long operation.
- What if I cannot find the exact code?
- Send us the model or shaft measurements on WhatsApp. We will quote an equivalent unit or the component you need. We work with leading brands and can source the part for your equipment.